* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Working bluetooth fork of dactyl

* Refactor thanks to zvecr

* Final refactor per PR comments

* Pragma once

* Update keyboards/handwired/pterodactyl/pterodactyl.h

* Update keyboards/handwired/pterodactyl/readme.md

* Update keyboards/handwired/pterodactyl/rules.mk

* Update keyboards/handwired/pterodactyl/rules.mk

* Update keyboards/handwired/pterodactyl/config.h

* Update keyboards/handwired/pterodactyl/pterodactyl.h

* Update keyboards/handwired/pterodactyl/config.h

* Update keyboards/handwired/pterodactyl/pterodactyl.h

* update readme

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/info.json

* Update keyboards/handwired/pterodactyl/readme.md

* Update keyboards/handwired/pterodactyl/config.h

* Update keyboards/handwired/pterodactyl/info.json

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/pterodactyl.h

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c

* Update keyboards/handwired/pterodactyl/matrix.c

* Fix/add formatting and info/keymap.json

* Update keyboards/handwired/pterodactyl/keymaps/default/keymap.json

* lint default/keymap.json

* format info.json

* Use the new debounce algorithm in dactyl/matrix.c [#2065]

This incorporates the fixed/optimized debounce code added to
quantum/matrix.c in:

* 508eddf8ba
* 4c6960835c
* 32f88c0717
* f403028974
* a06115df19

* Fix the row/column swap in dactyl [#2065]

With a column-driven keyboard, reading from the mcp23081 returns a
column-state, which takes some extra work to translate into the
row-state used in the actual matrix. The ergodox_ez code sidestepped
that problem by calling rows "columns" and columns "rows." With this
change, the dactyl now calls rows "rows" and columns "columns."

* Cleanup: variable names, documentation [#2065]

* Support MATRIX_MASKED in dactyl/matrix.c [#2065]

* Only unselect one col in unselect_col [#2065]

Bonus: saves one i2c transaction per matrix_scan!

* Implement COL2ROW in dactyl/matrix.c [#2065]

* Fix a typo in dactyl/matrix.c

This entirely doesn't matter. The PORT values are set during
init_keyboard and never change. They're repeatedly set to the same
thing. These PORT lines shouldn't even exist, but since they do, they
should at least look right.

* Implement COL_PINS/ROW_PINS for dactyl [#2065]

* Rename "mcp23018" to "expander" [#2065]

I honestly don't know whether/how well this code works with other I/O
expanders, but at least in theory, it should be generic enough to work
with others. Given that, the variable names shouldn't refer to a
specific model of expander.

* Remove matrix_power_up from dactyl/matrix.c [#2065]

It's commented out in quantum/matrix.c, and the dactyl has no power
up/down behavior beyond being unplugged (which goes to matrix_init), so
there's no sense keeping it around.

* Only initialize expander_input_mask once [#2065]

...and rename input_mask to expander_input_mask, since now that it isn't
scoped to init_expander it isn't clear that it's only for the expander.

* Copy the ergodox_ez code to handwired/dactyl

Differences from the Ergodox:

* Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under
    handwired
* Omitted several keymaps. They'll eventually be broken (since the
    Dactyl has fewer keys), and I don't want to try to fix them.
* Omitted the keymap images for the default layout, since they depict
    a different keyboard.
* Everything that said Ergodox now says Dactyl, naturally.

* [whitespace] Delete trailing whitespace

My editor does this automatically so it's just gonna keep cropping up...

* Cut the dactyl down to the right number of columns

(Remember, throughout matrix.c, everything called "row" is really a
column, and vice-versa).

* Remove LED-related code

* Tighten up the Dactyl's build options

* Whitespace cleanup in twimaster.c

* Hardtabs -> spaces
* No more trailing whitespace

* Typo fix

* Correct the CPU frequency units

The Teensy's CPU definitely doesn't run at 16 petahertz...

* Restore access to ONEHAND_ENABLE

I turned it off in 26d47cb426 while
desperately debugging; I just wanted to ensure it wasn't causing the
problem I was seeing. It was not, in fact, causing the problem, so it's
back.

Also fixed the swap matrix in dactyl.c, since it still referred to
columns that exist in the Ergodox but not the Dactyl.

* Clearer phrasing about TWI's effect on scan rate

* Fix up the Dactyl's firmware-loading instructions

Sadly, the Dactyl has no hole for the onboard reset button.

* Dvorak keymap for the Dactyl

* The Erincalling Layout

* Erincalling layout: Add a := key

I've been working in Go, which uses := a lot, and it's awkward to type
in this layout.

* Dactyl README: link to the dactyl-keyboard repo

* Add a missing copyright line

I don't know how much this matters? Honestly, it's enough for me that my
name is on the git commit. But hey, let's be consistent until there's a
specific reason not to be, right?

* Dactyl: remove commented-out code

I hate it I hate it I hate it

There's not even any information about what it was trying to do!!!! >:(

* Add a note about the row/column ridiculousness

* [whitespace] realign some constants

* Don't claim B4 is tied to VCC

It doesn't matter at all? I honestly don't know what the reason ever
was. It looks like it dates back to the original ErgoDox and I've never
seen one sentence about the purpose.

I've been skipping that wire for some time, and I promise it works fine.

* Dactyl keymaps: Send RALT for right-hand alt key

Not terribly important but I just like things tidy OK

* typo fix

* Refer to "dactyl.h" explicitly

QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange!

* Dactyl: Don't use QMK_SUBPROJECT_H at all

It's still breaking in CI, even though it was a never a problem locally.

This reverts commit f397402e10.

Only the EZ default keymaps compiles at the moment though.

* redoes matrix pins, abstracts backlight code for B5,6,7

* slimming down keyboard stuff, backlight breathing implemented

* don't call backlight init when no pin

* cleans up user/kb/quantum calls, keyboard files

* fix pvc atomic

* replaces CHANNEL with correct var in breathing

* removes .hexs, updates readmes, updates template

* cleans-up clueboards, readmes to lowercase

* updates readme

* fixes from tmk's repo

* rename keyboard to keyboards

This moves the keys closer to a traditional layout with some redundancy
around the middle to compensate for fast non-traditional typists like
myself who tend to wander from the home row a fair bit. Navigation keys
are provided in layer 2 (accessed by left thumb button), programming
symbols and classic numeric keypad in layer 1 (accessed by right thumb
button). Permanent layer switching is provided with a smaller thumb
button. Ctrl provided in place of caps lock (because no-one needs
caps/num lock), space, backspace, enter, shift all in traditional
positions with layer 1 providing things like equals, tilde and
apostrophe (an attempt to re-use existing muscle memory).

LEDs are pimped to the point of being silly (fading in/out on layer
switch, rolling on reboot ... because I can). Power and reset keys
provided on left thumb pad in layer 2.

No meh or hyper as I haven't found a burning need for them yet.