Ryan
a42d6426d9
Remove use of layout macros for `music_map` ( #20634 )
1 year ago
Ryan
5bd68e3695
Move single `LAYOUT`s to data driven ( #20365 )
1 year ago
Takeshi Nishio
9d0153dc70
[keyboard]Add v1 to jones keyboard ( #14405 )
* Change for latest information.
* Update from v03_1 to v1.
* Add v1 files.
* Remove finished todo comment.
* Fix COLUMN number, from "a" to "9".
* Formatting
* Update keyboards/jones/v1/rules.mk
* Add license header.
https://github.com/qmk/qmk_firmware/pull/14405#discussion_r710752035
* Implement better way to handle keycode for encoder.
Use "action_exec" instead of "tap_code16"
https://github.com/qmk/qmk_firmware/pull/14405#discussion_r710752924
* Move External EEPROM config to keyboard level
* Move the lest of DYNAMIC_KEYMAP config to keyboard level
https://github.com/qmk/qmk_firmware/pull/14405#discussion_r711668094
* Move the rest of DYNAMIC_KEYMAP config to keyboard level
https://github.com/qmk/qmk_firmware/pull/14405#discussion_r711668094
* Update keyboards/jones/v1/rules.mk
* Update keyboards/jones/v1/rules.mk
* Update keyboards/jones/v1/rules.mk
2 years ago
Takeshi Nishio
9f1608a6a2
Add unison v04 keyboard ( #11982 )
* Update: JonesのMIDIキーマップをベースに初期作成。AudioとMIDIの同時使用はファームウェアサイズ的に厳しい。
* Update: Unison用のIDへ変更
* Update: Audioはデフォとせず、OLEDをデフォとした。
* Update: v03基板から実際に動くものとなったため、v01からv03に変更。基本的な設定を完了。
* Update: 基本的なキーマップを作成
* Update: キーマップ、ロータリーエンコーダの感度を調整。
* TEST: BOOTMAGIC = lite でどうなるのかテスト
* Update: Jones ---> Unison
* TEST: BOOTMAGIC = lite で、TABキーでBootloaerに入る設定
* Update: インデント
* Update: QMKの一般的な表記に合わせ、 k(col)(row) から k(row)(col) へ変更。
* Update: 自前のカスタムマトリクスを使用せず、COL2ROW方式で総当たりマトリクスを動作させるテストを開始。
特に問題なく動作している。
* TEST: BOOTMAGICテスト用コード追加
* Update: 主に中央部分のキーマップ変更
* TEST: COL2ROWで、COLのピンの順番を変えてキーを読むテスト
* Update: QMKの仕様上、MacではKC_PSCRがFキーとして判定されるため、スクリーンショット用マクロを用意した。
* TEST: COL2ROWで、ROWとCOLのピン定義をずらした状態で、BOOTMAGIC = lite の(0,0)キーに引っかからない。
* Update: ロータリーエンコーダにマウスホイールを割り当て
* Update: 自明のコメントを削除
* Update: NKRO指定時は、NKRO動作を強制。
* Update: MIDIなしのとき、AUDIOのフル機能がファームウェアサイズ内に収まることをチェック。
* Update: Bootmagicテスト完了のため、無効化。
* TEST: LED動作チェック。
* Update: キーマップを、LOWER, RAISEを中心に大幅変更。
数字を左手レイヤーキーではなく、右手レイヤーキーにしたことで、CMD+Qによる誤爆アプリ終了を避ける狙いもある。
* Update: 未使用のNumレイヤとTapDanceを削除。
* Update: MIDI関連の設定を多数追加。
* New: Add Sequencer keymap
* enumの開始を明記
* TAP_DANCEを無効化
* シーケンサーで、トラック単位の有効・無効の切り替えを追加。※動作せず
* デバッグ用設定をテスト
* Change custom keycode name for classification.
* Add LED update on sequencer step.
* change LED adjusting value.
* TEST: SQ_T related things.
* DEBUG
* Increase track 6 ---> 8. Add track indicator.
* Add sequencer step viewer.
* Move Bootmagic lite position to keyboard's config.
* Revert matrix as phisically connected.
* Change default RGB lighting animation.
* Remove MIDI options from keyboard's config.
* change version
* Remove unused.
* Delete unused. Round-Robin matrix woks with COL2ROW.
* Delete unused. Round-Robin matrix woks with COL2ROW.
* Formatting.
* Formatting.
* Remove unused.
* No enum.
* LED setting for Sequencer layer.
* Add TODO flag
* Remove unused.
* change LCTL
* Update Rotary Encoder setting.
* revert to default
* Add TODO flag.
* Update to latest information.
* Update to latest information.
* Add v04
* Move keymaps directory to just under keyboard directory.
* Add music layout.
* Update to Unison layout.
* Add default keymap.
* Update readme description.
* Commenting.
* Exclude non-PR files.
* Change keymap name more general.
* Remove unused
* Commenting.
* Remove unused.
* Commenting.
* Change Macro name for consistency.
* Add tempo definition.
* Change transparent to noop for better musical play.
* Add Rotary Encoder push functions for Sequencer.
* FIX printscreen to work _WIN layer.
* Fix style name.
* Change keymap style from PC to Music.
* Adjust LED number and index to v04 PCB.
* Commenting.
* Add #ifdef block to LED config related.
* Change Sequencer display function from Rotary Encoder right-3 to right-4.
* Change default animations.
* Set LED effect range. Add LED reset on layer change.
* Remove unused.
* Commenting.
* Commenting.
* Use function to change Sequencer track indicator.
* Use function to change Sequencer track indicator.
* Remove unused
* Add PC-style keymap.
* Adjust keymap.
* Add micro volume control for Mac.
* Adjust keymap.
* Adjust cursor block.
* Adjust grave and tild in layer.
* Change magic-key position to Left-Bottom where both Music-style and Terminal-style have a key.
* Change LED settings for front-side 9 LEDs.
* Change keymap name.
* Update supported functions.
* Adjust indicator dimmer.
* Remove unused.
* Add underglow support.
* Add rotary encoder keymap at Adjust layer for test hardware function.
* Disable rotary encoders.
* Change description.
* Add support for underglow.
Disable knight animation to prevent unnatural feeling when underglow not installed.
* Commenting.
* Formatting.
* Turn on default layer indicator.
* remove duplication
* Change VID for via.
* Initial commit for VIA.
* Add layout option.
* restore AUDIO enabled.
* Removed a JSON file for VIA app, not for QMK.
* Remove non-related files for PR.
* Add keymap for music layout.
* Add photo links.
* Commenting.
* Apply PR checklist.
* Change unused function to "no".
* Add keymap image and change keymap as image shows.
* Change bootloader entering key to widely known "Left-Top".
* Turn off ENCODER by default.
* Add VIA keymap.
* Change VID unique.
https://github.com/qmk/qmk_firmware/pull/11982#discussion_r582276979
* Add config option to prepare future release, #11820 .
https://github.com/qmk/qmk_firmware/pull/11820
* Remove old defines for Audio.
Co-authored-by: Takeshi Nishio <kkeennnn@gmail.com>
3 years ago
Takeshi Nishio
deea6a9826
Add jones v.0.3 and v.0.3.1 keyboard ( #11130 )
* Update LEDの物理的接続とQMKのソフト的接続を調整し、左→アンダーグロー→右と繋がるようにした。
* Update レイヤーインジケータ関連変数を、#ifdefブロック内へ移動。
* Update コード整形
* Revert "Update コード整形"
This reverts commit c98483d9a0
.
* Update 未使用のキーコード、S_SLSHに関連するコードを削除。
* Update コード整形
* Update キーごとのTappingTerm設定を使用しなくなったため、削除。
* Update 未使用コード削除。
* Update コメント追加
* Update レイヤーとIMEのON/OFFを同じキーに割り当てるのをやめたため、関連コードを削除。
* Update コメント追加
* Update コメント
* Update 誤読を避けるため、ifブロックの表記を括弧を使用したものへ変更。動作に変化なし。
* Update 未使用のため削除。
* Update LED関連でデフォルトレイヤーを格納して使用しないため、削除。
* Update コメント
* Update レイヤーによってロータリーエンコーダの動作を変える機能を追加。
* Update comment
* Update 実態に合わせて修正。
* Update JP用キーコードへの書き換え忘れを修正。
* New v.0.3.1 JP style
* Update v.0.3のJPスタイルではオーディオサポートなし。
* Update to latest information
* New
* New keyboard "stmeishi"
* Update layout name
* Update move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Add "LAYOUT_all" for multiple layout.
* Update target to latest "v.0.3.1".
* Remove unused item.
* Update comments.
* Update Rotary Encoder pins to actual used count.
* Update increase value to maximum.
* Update comments.
* Change default Effects.
* Remove unused items.
* Update comment.
* Change: Use define and function insted of real value for wait.
* Update copyrght.
* Update Update: Add "LAYOUT_all" for multiple layout.
* New: Place info.json copied from v.0.3.1.
* Remove unused items.
* Update: Add comma at last element.
* Update comments.
* Update: change if block style.
* Update: Change Japanese comments to English.
* Update: Change layout name.
* Update: Change layout name.
* Update: Fix miss numbering for ANSI layout.
* Update: Move "Tap Dance" rule to keymap's rule.
* New: Add default keymap.
* Delete: Moving files to branch.
* Initial: Add files from local.
* Remove local only unused keymaps.
* Update: Remove unused, comment outed codes.
* Add default keymap for v.0.3.
* Update: Add custom keycodes.
* Update: Change layer handling from process_record_user to layer_state_set_user.
* Update comment.
* Update: Remove unused function.
* Add my ErgoDash settings.
* Add my NumAtreus_Plus8 settings.
* Add my test_k15r2 settings.
* New Colice片手分動作確認済み
* Update スプリットキーボード対応
* Update 反応が悪くずっと二度押ししているので、ESCキーをレイヤーキーとの共用から、単独機能に変更。
* Update 右手スイッチ配置変更。インジケータLED対応。
* Change インジケータLEDが眩しいので、明るさを下げた。
* Change 右手親指のキーマップ変更。
* Change NumLockの誤爆防止のため、二度押しでレイヤートグルするようにした。
* Change 左手側、Bの右側のキーを誤爆することが多く日本語入力が途切れるため、レイヤーキーの機能左右で入れ替え。
* Update 右手側、画像ソフトなどで使うため、矢印キーの左をレイヤーキーからCTRLへ変更。
* New add new keyboard
* Update Duplex-Matrixが動作した初版
* New Duplex-Matrixのサンプルコード by e3w2q を最新のQMKファームウェアで動作するよう一部修正したもの。
* update Comment-out debug print code.
* Update Colice V0.2 キープレートで矢印キー付近の物理配列が変わったことへ対応
* Update キーレイアウト
* New Initial commit
* Update Fix migrate errors from test_duplex_dp to test_col2col
* Remove unnecessary files
* Testing
* Update IKeJIさんの方法(とりあえずCOL2COLと呼ぶ)の動作テストOK
* New 2乗マトリクス配線のキーボードを追加
* Update キーレイアウト調整
* New colice_rr 初回コミット。基本動作確認OK。LED不調。
* Update Eable LED, Reduce firmwre size
* Update colice_rr キーマップ調整。
* Update colice_rr ロータリーエンコーダ機能追加。
* Move colice_rr を colice_rr_split へ移動。
* Update colice_rr_splitフォルダへ移動したことに対応。
* New colice_rr_splitの初回コミット。
* Update キーマップ調整
* Update キーマップ調整
* New initial comit
* Update 意図せずカッコを入力することがるため、LSPO、RSPCの使用を中止。
* Change Fnキー押下時の日本語入力ONを、長押し時にキャンセルするように変更。
* Change LED点灯方法変更。
* Change 基板バージョンごとにサブフォルダを作成するようにした。
* Update Windows用レイヤーを追加
* Update LED設定を調整
* New Jones v.0.2を新規追加
* Update Numレイヤー追加。キーマップ調整。レイヤーインジケータLED調整。
* Update 左手Yをやめる
* Update ESCによるNumレイヤートグルを、ESC連打でトグルするのを防止するため、ダブルタップからトリプルタップへ変更。
* Update readme
* Update QMKの標準に従うよう各ファイルの内容を変更。
* Update 長音(ー)を入力しやすくするため、レイヤー上でホームポジションに近い位置に配置。
* Update タップダンスの状態判別を、Single,Double,Triple,Holdの4つのステータスにまとめた。
* Update キーボードの電源が切れてもデフォルトレイヤーの状態を保存しておくため、MACとWINレイヤーへの変更はEEPROMへ書き込むようにした。
* Update 不要箇所削除
* Update キーマップをNarrowとWideで書き換えるのが不便なので、分割した。
* Update 最新のPCBに合わせ、デフォルトをv.0.2に変更。
* New v.0.3を新規追加
* Update キーマトリクスに後からJPを追加するため、ANSI用に表記変更。
* Update ANSI用のキーマップであることを明記。
* New JP用キーマップを新規追加。
* Update スイッチの物理的存在、Enter右側はキー1個、に合わせて、ANSIレイアウトを修正。
* New FA (Full Armor)用レイアウトを新規追加
* Update 物理的ロック付きのCAPSは使用しないため、無効化。
* Update ハードウェアのサポート対象にキープレートを追加。
* Update FAで使用するAudio、RotaryEncoderの機能追加。機能削減でファームウェアサイズ縮小。
* Update オーディオ機能にキークリックを追加。
* update FA用設定
* Update 右シフトにキー追加
* Update 変換キー調整
* New オーディを有効化。マウスキーはサイズ削減のため無効化。
* Update スイッチ配置ミス修正。
* Update ピン定義を、ロータリーエンコーダの回転方向に合わせた
* Update 2音同時発音用にピン定義を追加。
* Update ファームサイズに空きがあるので、クリッキー音をデフォルトで利用できるようにした。
* Update LED設定変更
* New 物理配列がJPで、中身はUS配列のキーマップを追加。
* Update 行と列が入り乱れたレイアウトのため、音階が正しくなるように、Music-Mode用のキーマップを定義。
* Change マイナーバージョンの表記に対応できるよう、DEVICE_VERの桁を1つ上げた。
* Update オルソ+ロースタガであることがわかるように、キーボードの簡単な説明を変更。
* New v.0.3.1の初期コミット
* Update 左右で回転方向の判定が逆になるので、右手側を左手に合わせた。
* Update キーマップ調整
* Update LEDインジケータを、v.0.3系と同じ点灯方法(2個をベースレイヤ、1個をRAISEなど)に変更。
* Update RGBLIGHT明るさ調整、エフェクト追加。
* Update 未使用キー設定を削除。
* Update Shiftと組み合わせた/?キーの反応を良くするため、キーごとにTAPPING_TERMを指定できるようにした。
* Update LEDエフェクト追加
* Update keymap
* Update 未使用のものを削除
* Update LEDの物理的接続とQMKのソフト的接続を調整し、左→アンダーグロー→右と繋がるようにした。
* Update レイヤーインジケータ関連変数を、#ifdefブロック内へ移動。
* Update コード整形
* Revert "Update コード整形"
This reverts commit c98483d9a0
.
* Update 未使用のキーコード、S_SLSHに関連するコードを削除。
* Update コード整形
* Update キーごとのTappingTerm設定を使用しなくなったため、削除。
* Update 未使用コード削除。
* Update コメント追加
* Update レイヤーとIMEのON/OFFを同じキーに割り当てるのをやめたため、関連コードを削除。
* Update コメント追加
* Update コメント
* Update 誤読を避けるため、ifブロックの表記を括弧を使用したものへ変更。動作に変化なし。
* Update 未使用のため削除。
* Update LED関連でデフォルトレイヤーを格納して使用しないため、削除。
* Update コメント
* Update レイヤーによってロータリーエンコーダの動作を変える機能を追加。
* Update comment
* Update 実態に合わせて修正。
* Update JP用キーコードへの書き換え忘れを修正。
* New v.0.3.1 JP style
* Update v.0.3のJPスタイルではオーディオサポートなし。
* Update to latest information
* New
* New keyboard "stmeishi"
* Update layout name
* Update move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Add "LAYOUT_all" for multiple layout.
* Update target to latest "v.0.3.1".
* Remove unused item.
* Update comments.
* Update Rotary Encoder pins to actual used count.
* Update increase value to maximum.
* Update comments.
* Change default Effects.
* Remove unused items.
* Update comment.
* Change: Use define and function insted of real value for wait.
* Update copyrght.
* Update Update: Add "LAYOUT_all" for multiple layout.
* New: Place info.json copied from v.0.3.1.
* Remove unused items.
* Update: Add comma at last element.
* Update comments.
* Update: change if block style.
* Update: Change Japanese comments to English.
* Update: Change layout name.
* Update: Change layout name.
* Update: Fix miss numbering for ANSI layout.
* Update: Move "Tap Dance" rule to keymap's rule.
* New: Add default keymap.
* Delete: Moving files to branch.
* Initial: Add files from local.
* Remove local only unused keymaps.
* Update: Remove unused, comment outed codes.
* Add default keymap for v.0.3.
* Update: Add custom keycodes.
* Update: Change layer handling from process_record_user to layer_state_set_user.
* Update comment.
* Update: Remove unused function.
* Revert "Remove: Non related files."
This reverts commit 82306568fa
.
* Update: To resolve "submodule path not found" message.
* RemoRemove: Non related files.
* Revert file before miss comit.
* Update: Remove unused keycode.
* Update: レイアウト設定内のNUMレイヤへのトグルを、カスタムキーコード表記に変更。
* Update: Comment
* Update: Remove unused items.
* Update layout settings.
* Update: For simplicity, change toggle ADJUST layer method from process_record_user() to layer_state_set_user().
* Update: comment and styling.
* Update: Remove unused custom keycodes.
* Update: For simplicity, change toggle layer method from process_record_user() to layer_state_set_user().
* Update: Remove unused items.
* Update: comment and styling.
* Update: Correct comment.
* Update description and flashing example.
* Update: Remove comment-outed bootloaders.
* Update comments.
* Update: Correct LED count, without under-glow.
* Update: Chenged to common values with v.0.3.1.
* Update: Changed to common values with v.0.3.
* Updarte: Remove unused layout.
* Update: Change default layout to "ALL".
* Update comment.
* Update comment.
* Add missing file.
* Update: Change build option definition style.
* Update: Change build option definition style.
* Update: Change CUSTOM_MATRIX to "lite" and convert "matrix.c" to "lite" version.
* Update: Move "music_map" to keyboard's c file.
To provide common definition for other keymap creator.
* Update: Change keyboard name "v.0.3.1" ---> "v03_1".
For human readability, version name "v.0.3.1" remains at title on "readme.md".
* Update: Change keyboard name "v.0.3" ---> "v03".
For human readability, version name "v.0.3" remains at title on "readme.md".
* Update: Correct matrix definition at "k92".
* Apply suggestions from code review
Remove unnecessary comment block.
* Apply suggestions from code review
Remove "Optional" deprecated items.
* Apply suggestions from code review
Change "make" target keymap to standard default.
* Apply suggestions from code review
Remove rules for MIDI_ENABLE, FAUXCLICKY_ENABLE and HD44780_ENABLE.
These features are not enabled.
* Apply suggestions from code review
Convert tabs to spaces.
* Update: Change #define ROW_SHIFTER to keyboard specific.
3 years ago
QMK Bot
fe50883c15
format code according to conventions [skip ci]
4 years ago
Nick Brassel
d13ada1162
Add customisable EEPROM driver selection ( #7274 )
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
4 years ago
zvecr
368de26996
Keyboard: Initial i75 port ( #4553 )
* Initial i75 port - currently supporting promicro and teensy2
* Initial i75 port - review fixes
5 years ago
Mattia Dal Ben
9ea0103520
Keyboard: Redox keymaps refactoring ( #4258 )
* Reconfigured keymap macro to resemble physical layout
* Updated italian keymap
* Added RGB controls
* Updated default keymap
* Updated german layout
* Updated jeherve keymap
* Changed include guards to pragmas
* Changed include guards to pragmas in keymaps
* Update readme
* Fixed unused include
* Fixed indentation
5 years ago
Mattia Dal Ben
3b7b1994cd
Redox keyboard code ( #2843 )
* Added Redox keyboard with default keymap (IT layout)
* Updated manufacturer url
* Applied requested changes
6 years ago
MechMerlin
1f77868427
More Configurator Warning Fixes ( #2716 )
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
6 years ago
Jack Humbert
800ec55dfc
Make arguments redo, subproject elimination ( #1784 )
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* start to update readmes and keyboards
* look in keyboard directories for board.mk
* update visualizer rules
* fix up some other keyboards/keymaps
* fix arm board ld includes
* fix board rules
* fix up remaining keyboards
* reset layout variable
* reset keyboard_layouts
* fix remainging keymaps/boards
* update readmes, docs
* add note to makefile error
* update readmes
* remove planck keymap warnings
* update references and docs
* test out tarvis build stages
* don't use stages for now
* don't use stages for now
6 years ago
Danny Nguyen
92b74e2d36
Rename cloned Nyquist files to Viterbi, create temporary keymaps
Add WIP keymap for dwallace
6 years ago