qmk_firmware

11 GiB

Tree: f3bef84dac

Author	SHA1	Message	Date
James Young	a03aa301de	Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]$BOOTMAGIC_ENABLE$[ \t=]\+$[a-zA-Z]\+$.;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.$BOOTMAGIC_ENABLE$[ \t=]\+$[a-z]\+$./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;$BOOTMAGIC_ENABLE$[ \t=]\+$[a-z]\+$.;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;$BOOTMAGIC_ENABLE = $full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;$BOOTMAGIC_ENABLE[ \t=]\+$full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;$BOOTMAGIC_ENABLE[ \t=]\+$full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;$BOOTMAGIC_ENABLE$[ \t=]\+$[a-z]\+$.;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;$BOOTMAGIC_ENABLE$[ \t=]\+$[a-z]\+$.;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;$BOOTMAGIC_ENABLE = lite$;\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;$BOOTMAGIC_ENABLE = yes$;\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;$BOOTMAGIC_ENABLE = no$;\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta	2 years ago
James Young	f2d34f38be	Nack: rename layout macro to LAYOUT_ortho_4x13 (#13784 )	2 years ago
farfalleflickan	a400681ccf	[Keyboard] Updated keyboard & keymaps (#12667 ) Co-authored-by: pastapojken <6597735+pastapojken@users.noreply.github.com>	2 years ago
Ryan	9dcd03b6ca	Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 ) * Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules	3 years ago
Drashna Jaelre	c80e5f9f88	Audio system overhaul (#11820 ) * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) `f52faeb5d` (origin/arm-dac-work) add sample and wavetable examples, parsers for both -> only the changes on audio_arm_., the keyboard related parts are split off to a separate commit `bfe468ef1` start morphing wavetable `474d100b5` refined a bit `208bee10f` play_notes working `3e6478b0b` start in-place documentation of dac settings `3e1826a33` fixed blip (rounding error), other waves, added key selection (left/right) `73853d651` 5 voices at 44.1khz `dfb401b95` limit voices to working number `9632b3379` configuration for the ez `6241f3f3b` notes working in a new way Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commit splits off the plank example keymap from commit `f52faeb5d` (origin/arm-dac-work) add sample and wavetable examples, parsers for both * refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac * refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation pulls three copies of the same code into one function which should improve readability and maintainability :-) * refactoring: move common code of arm and avr implementation into a separate/new file * refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs * refactoring: audio_avr_pwm - replacing function defines with plain register defines aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing * add audio-arm-pwm since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx) this code works on a "BluePill" clone, with an STM32F103C8B * clang-format changes on quantum/audio/* only * audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths * audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup) * refactoring: remove unused file from/for atmel-avr chips * refactoring: remove unused (avr) wavetable file * audio_arm_dac: adapt dac_end callback to changed chibios DAC api the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object. this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count * audio-arm-dac: show a compile-warning on undefined audio-pins Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio_arm_dac: switch from exemplary wavetable generation to sine only sine+triangle+squrare is exemplary, and not realy fit for "production" use 'stairs' are usefull for debugging (hardware, with an oscilloscope) * audio_arm_dac: enable output buffers in the STM32 to drive external loads without any additional ciruitry - external opamps and such * audio: prevent out-of-bounds array access * audio_arm_dac: add output-frequency correcting factor * audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition and do some code-cleanup, refine documentation, ... * audio_arm_pwm: increase pwm frequency for "higher fidelity" on the previous .frequency=100000 higher frequency musical notes came out wrong (frequency measured on a Tektronix TDS2014B) note \| freq \| arm-pwm C2 \| 65.4 \| 65.491 C5 \| 523.25 \| 523.93 C6 \| 1046.5 \| 1053.38 C7 \| 2093 \| 2129 C8 \| 4186 \| 4350.91 with .frequency = 500000 C8 \| 4186 \| 4204.6 * audio refactoring: remove unused variables * audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second * audio: allow feature selection in rules.mk so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up) or select the "pin alternate" pwm mode, for example on STM32F103 * audio-refactoring: move codeblocks in audio.[ch] into more coherent groups and add some inline documentation * audio-refactoring: cleanup and streamline common code between audio_arm_[dac\|pwm] untangeling the relation between audio.c and the two drivers and adding more documenting comments :-) * audio_avr_pwm: getting it back into working condition, and cleanup+refactor * audio-refactoring: documentation and typo fixes Co-Authored-By: Nick Brassel <nick@tzarc.org> * audio-refactoring: cleanup defines, inludes and remove debug-prints * audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged' * audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers * audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable * audio_chibios_dac: math.h has fmod for this * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface * audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines have the user select a pin by configuration in rules.mk instead of a define in config.h has the advantage of beeing in a common form/pattern across all audio-driver implementations * audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines * audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played * audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency... * audio-refactoring: get 'play_note' working again with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue * audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment) * audio-refactoring: moore documentation and some cleanup * audio-avr-pwm: no fallback on unset AUDIO_PIN this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy * audio-refactoring: untangling terminology: voice->tone the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet) * audio-pwm: allow freq=0 aka a pause/rest in a SONG continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion) * audio-refactoring: audio_advance_note -> audio_advance_state since it does not only affect 'one note', but the internally kept state as a whole * audio-refactoring: untangling terminology: polyphony the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time * audio-chibios-dac: add zero-crossing feature have tones only change/stop when the waveform approaches zero - to avoid audible clicks note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too * audio-refactoring: feature: time-multiplexing of tones on a single output channel this feature was in the original avr-pwm implementation misnomed as "polyphony" with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) ) * audio-avr-pwm: get music-mode working (again) on AVRs with both pwm channels, or either one of the two :-) play_notes worked already - but music_mode uses play_note * audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note * audio-arm-dac: per define selectable sample-luts plus generation script in ./util * audio-refactoring: heh, avr has a MIN... * audio-refactoring: add basic dac audio-driver based on the current/master implementation whereas current=d96380e65496912e0f68e6531565f4b45efd1623 which is the state of things before this whole audio-refactoring branch boiled down to interface with the refactored audio system = removing all redundant state-managing and frequency calculation * audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER * audio-arm-pwm: split the software/hardware implementations into separate files which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained * audio-refactoring: update documentation * audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic * audio-arm-dac: dac_additive: stop the hardware when the last sample completed the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes * audio-refactoring: make function-namespace consistent - all (public) audio functions start with audio_ - also refactoring play_notes/tones to play_melody, to visually distance it a bit from play_tone/_note audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_ * audio-arm-dac: update (inline) documentation regarding MAX for sample values * audio-chibios-dac: remove zero-crossing feature didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway * audio-arm-dac: dac_basic: respect the configured sample-rate * audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle like it already does in the avr implementation * audio-refactoring: get VIBRATO working (again) with all drivers (verified with chibios_[dac\|pwm]) * audio-arm-dac: zero-crossing feature (Mk II) wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones * audio-refactoring: re-add note-resting -> introduce short_rest inbetween - introduce a short pause/rest between two notes of the same frequency, to separate them audibly - also updating the refactoring comments * audio-refactoring: cleanup refactoring remnants remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system also updates the TODOS * audio-refactoring: reserve negative numbers as unitialized frequencies to allow the valid tone/frequency f=0Hz == rest/pause * audio-refactoring: FIX: first note of melody was missing the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone and some code-indentations/cleanup of related parts * audio-arm-dac: fix hardware init-click due to wron .init= value * audio-refactoring: new conveniance function: audio_play_click which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c * audio-refactoring: use milliseconds instead of seconds for 'click' parameters clicks are supposed to be short, seconds make little sense * audio-refactoring: use timer ticks instead of counters local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway * audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks * audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines * audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace * audio.c: stop notes after new ones have been started avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks * audio.c: bugfix: actually play a pause instead of just idling/stopping which lead the pwm drivers to stop entirely... * audio-arm-pwm: pwm-software: add inverted output new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT * audio-arm-dac: basic: handle piezo configured&wired to both audio pins * audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring * audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps avoids running into issues when the uint32 of the timer overflows * audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST * audio_arm_dac: basic: add missing bracket * audio.c: fix delta calculation was in the wrong place, needs to use the 'last_timestamp' before it was reset * audio-refactoring: buildfix: wrong legacy macro for set_timbre * audio.c: 16bit timerstamps suffice * audio-refactoring: separate includes for AVR and chibios * audio-refactoring: timbre: use uint8 instead of float * audio-refactoring: duration: use uint16 for internal per-tone/note state * audio-refactoring: tonemultiplexing: use uint16 instead of float * audio-arm-dac: additive: set second pin output-low used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE * audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h to be consistent with how other features are handled in QMK * audio-refactoring: buildfix: wrong legacy macro for set_tempo * audio-arm-dac: additive: set second pin output-low -- FIXUP * audio.c: do duration<>ms conversion in uint instead of float on AVR, to save a couple of bytes in the firmware size * audio-refactoring: cleanup eeprom defines/usage for ARM, avr is handled automagically through the avr libc and common_features.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio.h: throw an error if OFF is larger than MAX * audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise. the extra pusles probably matter little, since this is no high-fidelity sound generation :P * audio-arm-dac: additive: move zero-crossing code out of dac_value_generate which is/should be user-overridable == simple, and doing one thing: providing sample values state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback * audio-arm-dac: dac-additive: zero-crossing: ramping up or down after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output * audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause * audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF 1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P * audio-arm-dac: update synth_sample/_wavetable for new pin-defines * audio-arm-dac: default for AUDIO_DAC_VALUE_OFF turned out that zero or max are bad default choices: when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late * audio-arm-dac: additive: use DAC for negative pin instead of PAL, which only allows the pin to be configured as output; LOW or HIGH * audio-arm-dac: more compile-time configuration checks * audio-refactoring: typo fixed * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: add defines for B-pin as primary/only speaker also updates documentation. * audio-refactoring: update documentation with proton-c config.h example * audio-refactoring: move glissando (TODO) to voices.c refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c still needs some work though, as it is now the calculation should work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input? * audio-refactoring: cleanup: one round of aspell -c * audio-avr-pwm: back to AUDIO_PIN since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5 so there is no need to deal with separate defines like AUDIO_PIN_B5 * audio-refactoring: add technical documentation audio_driver.md which moves some in-code documentation there * audio-arm-dac: move AUDIO_PIN checks into c-code instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler) * audio-arm-dac: compile-fix: set AUDIO_PIN if unset workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error" * audio-refactoring: document tone-multiplexing feature * audio-refactoring: Apply suggestions from documentation review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-refactoring: Update docs/audio_driver.md * audio-refactoring: docs: fix markdown newlines Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>). Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-arm-dac: additive: fix AUDIO_PIN_ALT handling * audio-arm-pwm: align define naming with other drivers Co-authored-by: Joel Challis <git@zvecr.com> * audio-refactoring: set detault tempo to 120 and add documentation for the override * audio-refactoring: update backlight define checks to new AUDIO_PIN names * audio-refactoring: reworking PWM related defines to be more consistent with other QMK code Co-authored-by: Joel Challis <git@zvecr.com> * audio-arm: have the state-update-timer user configurable defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c) stm32f1 might need to set this to GPTD4, since 6 and 8 are not available * audio-refactoring: PLAY_NOTE_ARRAY was already removed in master * Add prototype for startup * Update chibiOS dac basic to disable pins on stop * Add defaults for Proton C * avoid hanging audio if note is completely missed * Don't redefine pins if they're already defined * Define A4 and A5 for CTPC support * Add license headers to keymap files * Remove figlet? comments * Add DAC config to audio driver docs * Apply suggestions from code review Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Add license header to py files * correct license header * Add JohSchneider's name to modified files AKA credit where credit's due * Set executable permission and change interpeter * Add 'wave' to pip requirements * Improve documentation * Add some settings I missed * Strip AUDIO_DRIVER to parse the name correctly * fix depreciated * Update util/audio_generate_dac_lut.py Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Fix type in clueboard config * Apply suggestions from tzarc Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Johannes <you@example.com> Co-authored-by: JohSchneider <JohSchneider@googlemail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joshua Diamond <josh@windowoffire.com> Co-authored-by: Jack Humbert <jack.humb@gmail.com>	3 years ago
Nick Brassel	78fe155b72	Fix up comments showing how to execute config migration. (#11621 )	3 years ago
Nick Brassel	f1fef16e4d	ChibiOS upgrade: keyboard conf migrations (phase 1) (#10418 ) * ChibiOS conf upgrade for acheron/arctic acheron/arctic - `8d3d233f15` * ChibiOS conf upgrade for acheron/austin acheron/austin - `beabc62045` * ChibiOS conf upgrade for acheron/keebspcb acheron/keebspcb - `e14a96e99a` * ChibiOS conf upgrade for aeboards/ext65/rev2 aeboards/ext65/rev2 - `0b97daef99` * ChibiOS conf upgrade for ai03/vega ai03/vega - `7e5f208278` * ChibiOS conf upgrade for at_at/660m at_at/660m - `e30393b654` * ChibiOS conf upgrade for bt66tech/bt66tech60 bt66tech/bt66tech60 - `a7f4e8a224` * ChibiOS conf upgrade for cannonkeys/an_c cannonkeys/an_c - `e7320dc093` * ChibiOS conf upgrade for cannonkeys/atlas cannonkeys/atlas - `063a8eaea7` * ChibiOS conf upgrade for cannonkeys/chimera65 cannonkeys/chimera65 - `01ce66c862` * ChibiOS conf upgrade for cannonkeys/db60 cannonkeys/db60 - `45636d0b3c` * ChibiOS conf upgrade for cannonkeys/devastatingtkl cannonkeys/devastatingtkl - `709e0155c4` * ChibiOS conf upgrade for cannonkeys/instant60 cannonkeys/instant60 - `7e530e1079` * ChibiOS conf upgrade for cannonkeys/instant65 cannonkeys/instant65 - `c8de288708` * ChibiOS conf upgrade for cannonkeys/iron165 cannonkeys/iron165 - `3a3c0273e2` * ChibiOS conf upgrade for cannonkeys/obliterated75 cannonkeys/obliterated75 - `cdf834802a` * ChibiOS conf upgrade for cannonkeys/ortho48 cannonkeys/ortho48 - `3432ff13c8` * ChibiOS conf upgrade for cannonkeys/ortho60 cannonkeys/ortho60 - `95be42a237` * ChibiOS conf upgrade for cannonkeys/ortho75 cannonkeys/ortho75 - `e1149893fd` * ChibiOS conf upgrade for cannonkeys/practice60 cannonkeys/practice60 - `6e4da87f0a` * ChibiOS conf upgrade for cannonkeys/practice65 cannonkeys/practice65 - `c436c06829` * ChibiOS conf upgrade for cannonkeys/rekt1800 cannonkeys/rekt1800 - `43e8e21b62` * ChibiOS conf upgrade for cannonkeys/satisfaction75 cannonkeys/satisfaction75 - `28ff9a8a11` * ChibiOS conf upgrade for cannonkeys/savage65 cannonkeys/savage65 - `53eaefae56` * ChibiOS conf upgrade for cannonkeys/tmov2 cannonkeys/tmov2 - `8b1ced8ff7` * ChibiOS conf upgrade for chavdai40 chavdai40/rev1 - `b166af66b0` chavdai40/rev2 - `0048c8ec8c` * ChibiOS conf upgrade for cheshire/curiosity cheshire/curiosity - `f1636e5363` * ChibiOS conf upgrade for clueboard/60 clueboard/60 - `bb5057d4a2` * ChibiOS conf upgrade for clueboard/66_hotswap/gen1 clueboard/66_hotswap/gen1 - `03fe10f4de` * ChibiOS conf upgrade for clueboard/66/rev4 clueboard/66/rev4 - `878e38a34f` * ChibiOS conf upgrade for coarse/cordillera coarse/cordillera - `5cae5c643e` * ChibiOS conf upgrade for converter/siemens_tastatur converter/siemens_tastatur - `48f82cd227` * ChibiOS conf upgrade for ergodox_infinity ergodox_infinity - `8df21d6129` * ChibiOS conf upgrade for function96 function96 - `deecdcdca3` * ChibiOS conf upgrade for generic_panda/panda65_01 generic_panda/panda65_01 - `8522d8107e` * ChibiOS conf upgrade for hadron/ver3 hadron/ver3 - `632af7727b` * ChibiOS conf upgrade for handwired/ck4x4 handwired/ck4x4 - `a4cb9b5b8c` * ChibiOS conf upgrade for handwired/co60/rev6 handwired/co60/rev6 - `be1688eeab` * ChibiOS conf upgrade for handwired/co60/rev7 handwired/co60/rev7 - `d196c57728` * ChibiOS conf upgrade for handwired/onekey/blackpill_f401 handwired/onekey/blackpill_f401 - `8387bfd568` * ChibiOS conf upgrade for handwired/onekey/blackpill_f411 handwired/onekey/blackpill_f411 - `855efdb2f6` * ChibiOS conf upgrade for handwired/onekey/bluepill handwired/onekey/bluepill - `60d8555b17` * ChibiOS conf upgrade for handwired/onekey/stm32f0_disco handwired/onekey/stm32f0_disco - `9bc12e29f5` * ChibiOS conf upgrade for handwired/onekey/teensy_32 handwired/onekey/teensy_32 - `17459dd8e7` * ChibiOS conf upgrade for handwired/onekey/teensy_lc handwired/onekey/teensy_lc - `3a9aed4681` * ChibiOS conf upgrade for handwired/pill60/blackpill_f401 handwired/pill60/blackpill_f401 - `5b652354ae` * ChibiOS conf upgrade for handwired/pill60/blackpill_f411 handwired/pill60/blackpill_f411 - `580255c171` * ChibiOS conf upgrade for handwired/pill60/bluepill handwired/pill60/bluepill - `29109b5413` * ChibiOS conf upgrade for handwired/riblee_f401 handwired/riblee_f401 - `dc68c31d7c` * ChibiOS conf upgrade for handwired/riblee_f411 handwired/riblee_f411 - `cf0fadff4c` * ChibiOS conf upgrade for handwired/steamvan/rev1 handwired/steamvan/rev1 - `743b395ac8` * ChibiOS conf upgrade for handwired/t111 handwired/t111 - `99b61ae569` * ChibiOS conf upgrade for handwired/twadlee/tp69 handwired/twadlee/tp69 - `3ab2753c40` * ChibiOS conf upgrade for handwired/z150 handwired/z150 - `78808b0c86` * ChibiOS conf upgrade for hs60/v2 hs60/v2/ansi - `7bcd152c26` hs60/v2/hhkb - `d77f393d28` hs60/v2/iso - `5d3d20de91` * ChibiOS conf upgrade for infinity60 infinity60 - `dbcbb2f58e` * ChibiOS conf upgrade for k_type k_type - `492f476177` * ChibiOS conf upgrade for keebio/bdn9/rev2 keebio/bdn9/rev2 - `4dbb5d606b` * ChibiOS conf upgrade for keebio/choconum keebio/choconum - `1521e63408` * ChibiOS conf upgrade for keebwerk/mega keebwerk/mega/ansi - `10e32718c7` * ChibiOS conf upgrade for misterknife/knife66 misterknife/knife66 - `cf2f3d2610` * ChibiOS conf upgrade for nack nack - `ba7f421d56` * ChibiOS conf upgrade for nebula12 nebula12 - `aedb11fa89` * ChibiOS conf upgrade for nebula68 nebula68 - `6bed6afb2f` * ChibiOS conf upgrade for nemui nemui - `86ed80ea85` * ChibiOS conf upgrade for nk65 nk65 - `75b2484741` * ChibiOS conf upgrade for nk87 nk87 - `f719a739a3` * ChibiOS conf upgrade for peiorisboards/ixora peiorisboards/ixora - `b5adf1090f` * ChibiOS conf upgrade for phoenix phoenix - `21bfb14c52` * ChibiOS conf upgrade for polilla polilla - `3ba5f326b2` * ChibiOS conf upgrade for primekb/meridian primekb/meridian - `df266e25c6` * ChibiOS conf upgrade for projectkb/alice projectkb/alice - `eee7210f61` * ChibiOS conf upgrade for projectkb/signature87 projectkb/signature87 - `617430e601` * ChibiOS conf upgrade for ramonimbao/squishy65 ramonimbao/squishy65 - `88e4cd3db8` * ChibiOS conf upgrade for ramonimbao/wete ramonimbao/wete - `f0e90d943d` * ChibiOS conf upgrade for rart/rartlice rart/rartlice - `f7a6b58e6c` * ChibiOS conf upgrade for retro_75 retro_75 - `34c7b291fb` * ChibiOS conf upgrade for rocketboard_16 rocketboard_16 - `24e6503a7a` * ChibiOS conf upgrade for satt/vision satt/vision - `c926d6433d` * ChibiOS conf upgrade for tkc/candybar tkc/candybar/lefty - `2f269cbed5` tkc/candybar/righty - `9b1448b2cc` * ChibiOS conf upgrade for tkc/godspeed75 tkc/godspeed75 - `2cfed58d44` * ChibiOS conf upgrade for tkw/stoutgat/v2/f411 tkw/stoutgat/v2/f411 - `b094651ec6` * ChibiOS conf upgrade for viktus/styrka viktus/styrka - `f3f678ea55` * ChibiOS conf upgrade for vinta vinta - `e5403dc6bb` * ChibiOS conf upgrade for westfoxtrot/prophet westfoxtrot/prophet - `0e4d6987ff` * ChibiOS conf upgrade for whitefox whitefox - `5ca6de6fb0` * ChibiOS conf upgrade for wolfmarkclub/wm1 wolfmarkclub/wm1 - `2d8294e29b` * ChibiOS conf upgrade for xelus/kangaroo xelus/kangaroo - `f9697ba27d` * ChibiOS conf upgrade for xelus/trinityxttkl xelus/trinityxttkl - `a457601b44` * ChibiOS conf upgrade for xelus/valor_frl_tkl xelus/valor_frl_tkl - `27ec14b9ee` * ChibiOS conf upgrade for zoo/wampus zoo/wampus - `926487c1f5` * ChibiOS conf upgrade for zvecr/split_blackpill zvecr/split_blackpill - `02f4393d01` * ChibiOS conf upgrade for zvecr/zv48/f401 zvecr/zv48/f401 - `8b1766a24f` * ChibiOS conf upgrade for zvecr/zv48/f411 zvecr/zv48/f411 - `09ba645092`	3 years ago
Nick Brassel	4444f3cc55	Disable almost all ChibiOS subsystems in default configs (#11111 ) * Disable almost all ChibiOS subsystems. * Modify ChibiOS config updater script to fixup mcuconf include, use develop as base instead of master. * Add default early-init bootloader to F042/F072. * Back to 100k freq.	3 years ago
James Young	c66df16644	2020 November 28 Breaking Changes Update (#11053 ) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change	3 years ago
pastapojken	ad5cbe5982	Added new keyboard - nack (#10940 ) Co-authored-by: Ryan <fauxpark@gmail.com>	3 years ago

10 Commits (f3bef84dace5d1d938f9d02be644bf421a4a3de1)