You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Joel Challis f00402a2f3
Refactor to use led config - Part 3 (#10966)
3 years ago
..
keymaps [Keyboard] Add Ixora keypad (#5931) 5 years ago
chconf.h 2020 February 29 Breaking Changes Update (#8064) 4 years ago
config.h Refactor to use led config - Part 3 (#10966) 3 years ago
halconf.h 2020 February 29 Breaking Changes Update (#8064) 4 years ago
info.json [Keyboard] Add Ixora keypad (#5931) 5 years ago
ixora.c Refactor to use led config - Part 3 (#10966) 3 years ago
ixora.h [Keyboard] Add Ixora keypad (#5931) 5 years ago
mcuconf.h [Keyboard] Add Ixora keypad (#5931) 5 years ago
readme.md [Keyboard] Add Ixora keypad (#5931) 5 years ago
rules.mk Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 4 years ago

readme.md

Ixora

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Peioris
Hardware Supported: Ixora PCB
Hardware Availability: Peioris

Make example for this keyboard (after setting up your build environment):

make peiorisboards/ixora:default:dfu-util

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).