* Set up Bonsai C4 as a platform board file * corrections and improvements based on testing and feedback * Added VBUS sensing as default capability for improved split support using Bonsai C4 * Update clock divisor for SPI flash Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>pull/19072/head
@ -1,23 +0,0 @@ | |||
/* Copyright 2022 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// Set up SPI slave select pin | |||
void keyboard_post_init_kb(void) { | |||
#ifdef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | |||
setPinOutput(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | |||
writePinHigh(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | |||
#endif | |||
} |
@ -1,79 +0,0 @@ | |||
/* Copyright 2022 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
// This file includes example #defines to enable commonly-used functionality | |||
// (SPI, PWM backlight, etc.) on specific pins. Capabilities you want to include | |||
// should be added to the config.h for your keyboard. Not all capabilities are | |||
// shown; for example: | |||
// I2C is not shown because the QMK defaults are sufficient for SCL on B6 and SDA on B7 | |||
// Serial communications (for split keyboards) is not shown because QMK defaults work | |||
// for either pins A15 or B6 | |||
// If you need to change pins for PWM, SPI, I2C, or Serial communications, be aware that | |||
// doing this may require changing the driver, channel, PAL (Pin ALternate function) mode, | |||
// DMA stream, and/or DMA channel. | |||
// Bonsai C4 wires up pin A9 for Vbus sensing pin by default. For spilt keyboards, this | |||
// can be used to determine which half of the keyboard is plugged into USB. | |||
// For boards using Bonsai C4 merely as a reference design, the VBUS sense pin A9 | |||
// can be used for purposes other than Vbus sensing (e.g. the switch | |||
// matrix). | |||
// | |||
// If A9 is needed for Vbus sensing, uncomment the line | |||
// below. Most keyboards using Bonsai C4 can leave the line below | |||
// commented out. | |||
// | |||
// #undef BOARD_OTG_NOVBUSSENS | |||
// FRAM configuration | |||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0 | |||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz | |||
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip | |||
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 | |||
// External flash configuration | |||
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12 | |||
#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1 // 96MHz; max supported by W25Q128JV is 133MHz | |||
#define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte | |||
#define EXTERNAL_FLASH_PAGE_SIZE 256 | |||
#define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase | |||
// SPI Configuration (needed for FRAM and FLASH) | |||
#define SPI_DRIVER SPID1 | |||
#define SPI_SCK_PIN B3 | |||
#define SPI_MOSI_PIN B5 | |||
#define SPI_MISO_PIN B4 | |||
// Example code to set up PWM backlight on pin A6 | |||
// If a different pin is used, a different PWM driver/channel settings may be necessary | |||
#define BACKLIGHT_PIN A6 | |||
#define BACKLIGHT_PWM_DRIVER PWMD3 | |||
#define BACKLIGHT_PWM_CHANNEL 1 | |||
// Example code for WS2812 underglow | |||
// Only pin A10 is wired to send 5V signals to the WS2812 | |||
// This also usually requires adding special wiring during board assembly | |||
#define RGB_DI_PIN A10 | |||
#define WS2812_PWM_DRIVER PWMD1 | |||
#define WS2812_PWM_CHANNEL 3 | |||
#define WS2812_PWM_PAL_MODE 1 | |||
#define WS2812_DMA_STREAM STM32_DMA2_STREAM5 | |||
#define WS2812_DMA_CHANNEL 6 |
@ -1,35 +0,0 @@ | |||
/* Copyright 2021 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// If you are using I2C (e.g. for OLED), include this line | |||
#define HAL_USE_I2C TRUE | |||
// If you are using PWM (e.g. for WS2812, backlight, etc.) include this line | |||
#define HAL_USE_PWM TRUE | |||
// If you are using serial comms for split communications, include these lines | |||
#define HAL_USE_SERIAL TRUE | |||
#define SERIAL_BUFFERS_SIZE 256 | |||
// If you are using SPI (e.g. for FRAM, flash, etc.) include these lines | |||
#define HAL_USE_SPI TRUE | |||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
// This enables interrupt-driven mode | |||
#define SPI_USE_WAIT TRUE | |||
#include_next <halconf.h> |
@ -1,35 +0,0 @@ | |||
/* Copyright 2022 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include_next <mcuconf.h> | |||
// Used for underglow in example code | |||
#undef STM32_PWM_USE_TIM1 //timer 1 channel 3 | |||
#define STM32_PWM_USE_TIM1 TRUE | |||
// Used for backlight in examples | |||
#undef STM32_PWM_USE_TIM3 //timer 3 channel 1 | |||
#define STM32_PWM_USE_TIM3 TRUE | |||
// Used for FRAM and flash in example code | |||
#undef STM32_SPI_USE_SPI1 | |||
#define STM32_SPI_USE_SPI1 TRUE | |||
// Used for Split comms in example code | |||
#undef STM32_SERIAL_USE_USART1 | |||
#define STM32_SERIAL_USE_USART1 TRUE |
@ -1,10 +0,0 @@ | |||
# Bonsai C4 template code | |||
Currently, the converter for Pro Micro to Bonsai C4 only does pin mapping. This is sufficient for simple keyboards and also a good start for | |||
incorporating into more advanced keyboards with other features (like RGB, OLED, backlighting, split communiciations, etc.). However, to make | |||
use of the more advanced features--including using the FRAM and flash memory chip included on Bonsai C4--various peripheral hardware must | |||
be configured. Pro Micro does not requrie such configuration because such functionality is more limited and hard-wired to specific pins. | |||
The code here provides examples that can be used to operate SPI, I2C, PWM, and Serial comms. In addition to using the converter, you will | |||
need to take code (as-needed) and add it to existing config.h files, or add in new halconf.h and mcuconf.h files. If you are changing which | |||
pins are used for certain functions, you should verify the new pins support that functionality, and check all assingments to ensure the correct settings are used (including as-applicable driver, channel, PAL (Pin ALternate function) mode, DMA stream, and/or DMA channel). |
@ -0,0 +1,9 @@ | |||
# List of all the board related files. | |||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c | |||
# Required include directories | |||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE | |||
# Shared variables | |||
ALLCSRC += $(BOARDSRC) | |||
ALLINC += $(BOARDINC) |
@ -0,0 +1,20 @@ | |||
/* Copyright 2020 Nick Brassel (tzarc) | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 3 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include_next "board.h" | |||
#undef STM32_HSE_BYPASS |
@ -0,0 +1,92 @@ | |||
/* Copyright 2022 David Hoelscher, customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 3 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes | |||
// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1 | |||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP | |||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE | |||
#endif | |||
// FRAM configuration | |||
#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN | |||
# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0) | |||
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz | |||
# define EXTERNAL_EEPROM_BYTE_COUNT 8192 | |||
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip | |||
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 | |||
#endif | |||
// External flash configuration | |||
#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | |||
# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12) | |||
# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz | |||
# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte | |||
# define EXTERNAL_FLASH_PAGE_SIZE 256 | |||
# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase | |||
#endif | |||
// SPI Configuration (needed for FRAM and FLASH) | |||
#ifndef SPI_DRIVER | |||
# define SPI_DRIVER SPID1 | |||
#endif | |||
#ifndef SPI_SCK_PIN | |||
# define SPI_SCK_PIN PAL_LINE(GPIOB, 3) | |||
#endif | |||
#ifndef SPI_MOSI_PIN | |||
# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5) | |||
#endif | |||
#ifndef SPI_MISO_PIN | |||
# define SPI_MISO_PIN PAL_LINE(GPIOB, 4) | |||
#endif | |||
// I2C Configuration | |||
#ifdef CONVERT_TO_BONSAI_C4 | |||
# ifndef I2C1_SCL_PIN | |||
# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6) | |||
# endif | |||
# ifndef I2C1_SDA_PIN | |||
# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9) | |||
# endif | |||
#endif | |||
// WS2812-style LED control on pin A10 | |||
#ifdef WS2812_DRIVER_PWM | |||
# ifndef RGB_DI_PIN | |||
# define RGB_DI_PIN PAL_LINE(GPIOA, 10) | |||
# endif | |||
# ifndef WS2812_PWM_DRIVER | |||
# define WS2812_PWM_DRIVER PWMD1 | |||
# endif | |||
# ifndef WS2812_PWM_CHANNEL | |||
# define WS2812_PWM_CHANNEL 3 | |||
# endif | |||
# ifndef WS2812_PWM_PAL_MODE | |||
# define WS2812_PWM_PAL_MODE 1 | |||
# endif | |||
# ifndef WS2812_DMA_STREAM | |||
# define WS2812_DMA_STREAM STM32_DMA2_STREAM5 | |||
# endif | |||
# ifndef WS2812_DMA_CHANNEL | |||
# define WS2812_DMA_CHANNEL 6 | |||
# endif | |||
#endif | |||
#ifndef USB_VBUS_PIN | |||
# define USB_VBUS_PIN PAL_LINE(GPIOA, 9) | |||
#endif |
@ -0,0 +1,49 @@ | |||
/* Copyright 2022 David Hoelscher, customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 3 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <https://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#ifndef HAL_USE_SPI | |||
# define HAL_USE_SPI TRUE | |||
#endif | |||
#ifndef HAL_USE_I2C | |||
# define HAL_USE_I2C TRUE | |||
#endif | |||
#ifdef SPLIT_KEYBOARD | |||
# ifndef HAL_USE_SERIAL | |||
# define HAL_USE_SERIAL TRUE | |||
# endif | |||
# ifndef SERIAL_BUFFERS_SIZE | |||
# define SERIAL_BUFFERS_SIZE 256 | |||
# endif | |||
#endif | |||
#ifdef WS2812_DRIVER_PWM | |||
# ifndef HAL_USE_PWM | |||
# define HAL_USE_PWM TRUE | |||
# endif | |||
#endif | |||
#ifndef SPI_SELECT_MODE | |||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
#endif | |||
#ifndef SPI_USE_WAIT | |||
# define SPI_USE_WAIT TRUE | |||
#endif | |||
#include_next <halconf.h> |
@ -0,0 +1,249 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef MCUCONF_H | |||
#define MCUCONF_H | |||
/* | |||
* STM32F4xx drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 15...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
#define STM32F4xx_MCUCONF | |||
#define STM32F411_MCUCONF | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
#define STM32_BKPRAM_ENABLE FALSE | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_LSI_ENABLED TRUE | |||
#define STM32_HSE_ENABLED TRUE | |||
#define STM32_LSE_ENABLED FALSE | |||
#define STM32_CLOCK48_REQUIRED TRUE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||
#define STM32_PLLM_VALUE 4 | |||
#define STM32_PLLN_VALUE 96 | |||
#define STM32_PLLP_VALUE 2 | |||
#define STM32_PLLQ_VALUE 4 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||
#define STM32_PPRE2 STM32_PPRE2_DIV1 | |||
#define STM32_RTCSEL STM32_RTCSEL_LSI | |||
#define STM32_RTCPRE_VALUE 8 | |||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI | |||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 | |||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK | |||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 | |||
#define STM32_I2SSRC STM32_I2SSRC_CKIN | |||
#define STM32_PLLI2SN_VALUE 192 | |||
#define STM32_PLLI2SR_VALUE 5 | |||
/* | |||
* IRQ system settings. | |||
*/ | |||
#define STM32_IRQ_EXTI0_PRIORITY 6 | |||
#define STM32_IRQ_EXTI1_PRIORITY 6 | |||
#define STM32_IRQ_EXTI2_PRIORITY 6 | |||
#define STM32_IRQ_EXTI3_PRIORITY 6 | |||
#define STM32_IRQ_EXTI4_PRIORITY 6 | |||
#define STM32_IRQ_EXTI5_9_PRIORITY 6 | |||
#define STM32_IRQ_EXTI10_15_PRIORITY 6 | |||
#define STM32_IRQ_EXTI16_PRIORITY 6 | |||
#define STM32_IRQ_EXTI17_PRIORITY 15 | |||
#define STM32_IRQ_EXTI18_PRIORITY 6 | |||
#define STM32_IRQ_EXTI19_PRIORITY 6 | |||
#define STM32_IRQ_EXTI20_PRIORITY 6 | |||
#define STM32_IRQ_EXTI21_PRIORITY 15 | |||
#define STM32_IRQ_EXTI22_PRIORITY 15 | |||
#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 | |||
#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 | |||
#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 | |||
#define STM32_IRQ_TIM1_CC_PRIORITY 7 | |||
#define STM32_IRQ_TIM2_PRIORITY 7 | |||
#define STM32_IRQ_TIM3_PRIORITY 7 | |||
#define STM32_IRQ_TIM4_PRIORITY 7 | |||
#define STM32_IRQ_TIM5_PRIORITY 7 | |||
#define STM32_IRQ_USART1_PRIORITY 12 | |||
#define STM32_IRQ_USART2_PRIORITY 12 | |||
#define STM32_IRQ_USART6_PRIORITY 12 | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_IRQ_PRIORITY 6 | |||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM4 FALSE | |||
#define STM32_GPT_USE_TIM5 FALSE | |||
#define STM32_GPT_USE_TIM9 FALSE | |||
#define STM32_GPT_USE_TIM10 FALSE | |||
#define STM32_GPT_USE_TIM11 FALSE | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 TRUE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_USE_I2C3 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 | |||
#define STM32_I2C_I2C3_DMA_PRIORITY 3 | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* I2S driver system settings. | |||
*/ | |||
#define STM32_I2S_USE_SPI2 FALSE | |||
#define STM32_I2S_USE_SPI3 FALSE | |||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10 | |||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10 | |||
#define STM32_I2S_SPI2_DMA_PRIORITY 1 | |||
#define STM32_I2S_SPI3_DMA_PRIORITY 1 | |||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_USE_TIM4 FALSE | |||
#define STM32_ICU_USE_TIM5 FALSE | |||
#define STM32_ICU_USE_TIM9 FALSE | |||
#define STM32_ICU_USE_TIM10 FALSE | |||
#define STM32_ICU_USE_TIM11 FALSE | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_TIM1 TRUE | |||
#define STM32_PWM_USE_TIM2 FALSE | |||
#define STM32_PWM_USE_TIM3 TRUE | |||
#define STM32_PWM_USE_TIM4 FALSE | |||
#define STM32_PWM_USE_TIM5 FALSE | |||
#define STM32_PWM_USE_TIM9 FALSE | |||
#define STM32_PWM_USE_TIM10 FALSE | |||
#define STM32_PWM_USE_TIM11 FALSE | |||
/* | |||
* RTC driver system settings. | |||
*/ | |||
#define STM32_RTC_PRESA_VALUE 32 | |||
#define STM32_RTC_PRESS_VALUE 1024 | |||
#define STM32_RTC_CR_INIT 0 | |||
#define STM32_RTC_TAMPCR_INIT 0 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 TRUE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USE_USART6 FALSE | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 TRUE | |||
#define STM32_SPI_USE_SPI2 FALSE | |||
#define STM32_SPI_USE_SPI3 FALSE | |||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) | |||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) | |||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 8 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USE_USART6 FALSE | |||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) | |||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) | |||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_USART6_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_OTG1 TRUE | |||
#define STM32_USB_OTG1_IRQ_PRIORITY 14 | |||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512 | |||
#define STM32_USB_HOST_WAKEUP_DURATION 2 | |||
/* | |||
* WDG driver system settings. | |||
*/ | |||
#define STM32_WDG_USE_IWDG FALSE | |||
#endif /* MCUCONF_H */ |
@ -1,4 +1,4 @@ | |||
# Proton C MCU settings for converting AVR projects | |||
MCU := STM32F411 | |||
BOARD := GENERIC_STM32_F411XE | |||
BOOTLOADER := stm32-dfu | |||
BOARD := BONSAI_C4 | |||
BOOTLOADER := stm32-dfu |
@ -0,0 +1,5 @@ | |||
BACKLIGHT_DRIVER ?= pwm | |||
WS2812_DRIVER ?= pwm | |||
SERIAL_DRIVER ?= usart | |||
FLASH_DRIVER ?= spi | |||
EEPROM_DRIVER ?= spi |