* Move tmk_core/common/backlight to quantum/backlight

* Add guards to backlight inclusion

* Add guards to backlight inclusion

* Update backlight guards on clueboard/60

* Use full paths to avoid vpath issues

* Fix bug in `do_code16()`

* Remove qk_ mods functions

* Port DEBUG_MATRIX_SCAN_RATE to core

* Remove duplicate DEBUG_MATRIX_SCAN_RATE implementations

* Remove duplicate DEBUG_MATRIX_SCAN_RATE implementation from handwired/xealous

* Add console logic from ergodox_ez

* Move AVR backlight to own file, add borrowed ARM implementation

* Tiny fix for backlight custom logic

* Remove duplicate board from rebase

* Fix f303 onekey example

* clang-format

* clang-format

* Remove backlight keymap debug

* Initial pass of ARM backlight docs

* Initial pass of ARM backlight docs - resolve todos

* fix rules validation logic

* Add f072 warning

* Add f072 warning

* tidy up breathing in backlight keymap

* tidy up breathing in backlight keymap

* add missing break to backlight keymap

* Initial stab at some fake dfu-util-split-left behaviour

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Clang format fixes

* Fake eeprom init for both left and right hand

* Add docs on bootmagic/magic keycodes for setting handedness

* Clang format fixes

* Maintain backwards compatibility

* Maintain backwards compatibility

This will manually wipe the EEPROM. This is a hacky solution for when new ranges are added or moved around. 

A better (more complicated) solution would be to zero out everything, not just known ranges.  But for now, this is a hacky solution that will work.

* Added OLED Display autoscroll during periods of OLED data inactivity.

* Fixing compile errors

* Feedback from review

* Additional changes for Layer State typedef compatibility

* Replace biton32 with get_highest_layer in docs

* Change additional layer structure code

* Fix uGFX reference issue

* Remove dynamic_keymap check

* Where did all these extra spaces come from

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes

Key codes to swap and unswap the control and windows/cmd keys

* Fix issues with pull request #6110

Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end

* Move new keycodes to the end of the enum (#6110)

* add cases for swapped control and OS keys to mod_config (#6110)

* Add new keycodes to feature_bootmagic.md (#6110)

* Add R+L swap codes to keep in parity with AG_* codes

* Extend Magic range check to include new magic codes

* Update audio docs

* Combine 2 byte ranges into 1 word for EECONFG

Fix names for Keymap config EEPROM

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Remove superfluous JTAG disable code

* 32A has differently named register

* Accidentally some operators

* 32A also has different JTAG pins

* Wrap disable_jtag() in an ifndef

* Document this new define

* Rename the define, it conflicts with a LUFA thing

Also, move the ifndef wrapping to the call in keyboard_setup()

* Extend allowed range of tappable keycodes to include modifiers

* Get rid of the magic numbers altogether

* Remove some more magic numbers

* Extract LM() functionality from ACT_LAYER_TAP

* Use ACTION() macro everywhere

* Add support for TAP_CODE_DELAY to Hold-Tap keys

* Better handling for tap code delay and caps version

* Update IS_COMMAND definition in templates to use MOD_MASK_SHIFT

* Update IS_COMMAND in docs

* Update IS_COMMAND default definition in tmk_core

* Update table in Command docs based on suggestion

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Make Caps Lock delay more reasonable

* Update documentation

* Update docs/config_options.md

Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>

* Update docs/config_options.md

Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>

* Store backlight breathing state in EEPROM

* Reduce backlight_config.level from 6 bits to 4 (max 15 "on" levels)

* Error out if BACKLIGHT_LEVELS is > 15

* Remove mention of default backlight pin in rules.mk template

* Remove pointless comment

Zeroing out spd in eeconfig_init_quantum

Switched to block read & update

Update tmk_core/common/eeconfig.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

Fixing init compile error

Update eeconfig.c

Dead / Missing API cleanup

alignment

* Added USBasp bootloader option for USBasploader

* author comment

* ifdef fix :)

* Add usbasp target

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update docs/flashing.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Typedef'ed layer_state_t to uint32_t.

This enables future work with layer_state_t to uint8_t for optimization purposes.

* Removed accidental xeal60 commit

* Revert to egyptian brackets, added sizeof(layer_state_t) so when layer_state_t is redefined it will automagically work.

* Add additional typedefs

* Add checks for setting layer state

* Update tmk_core/common/action_layer.h

Co-Authored-By: alex-ong <the.onga@gmail.com>

* Revert commit.

* Increase delay for Hold-Tap register for CAPSLOCK

Because it seems that the 80ms delay wasn't too much

* Screw it, make the caps delay a define and make it configurable

* Split common conversion

* Updated serial and encoder pins

* Fixing default folder until r2

* Fixing oled driver on slave split common

* Fixing keymap compile errors

* Fixing oled inactivity timer on slave split common

* Hoisted oled driver task, init, & activity to keyboard.c

* Update keyboards/sol/config.h

Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com>

* Remove TAPPING_FORCE_HOLD

* Re-fix Mousekey Movements

After the new movement model was instroduced, it broke diagonal momement, again.  Reapplying fix from #3147 to both old and new acceleration method.

* Make diagonal mouse report checks more readable

Co-Authored-By: drashna <drashna@live.com>

Somebody was a very, very bad boy, and did a poor job of copy-pasting

I'm not sure how to check if it's the same as RGBLIGHT's EEPROM, but if you don't init it, it **will not** work properly until it is initialized.

Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411

Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason).

What this commit does is move the reset_key back to the original memory location it was in before.

When waking from suspend, only enable the LED drivers if they were not previously set to disabled by the user. This functionality was removed by the recent updates to adapt Massdrop keyboards to QMK RGB Matrix. Affects Massdrop CTRL and ALT keyboards compiled using Massdrop Configurator mode.

* Add customizable tapping terms

* Add Documentation

* Fix function

* Fixes

* It's not a pointer

* Add debugging output

* Update documentation to be at least vaguely accurate

* Use `get_tapping_term(tapping_key.event)` instead

`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.

However `tapping_key.event` actually gives the correct column and row information.  It appears be the correct structure to use. 

In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h

* Use variable tapping term value rather than define

* Silly drashna - tapping_key.event, not event

* add get_event_keycode() function

* Fix typo

Co-Authored-By: drashna <drashna@live.com>

* Remove post_process_record_quantum since it's the wrong PR

* Update quantum/quantum.c

Co-Authored-By: drashna <drashna@live.com>

* Better handle ifdef statement for permissive hold

Since we can't be sure that tapping term is actually 500

* Update quantum.c comments based on feedback

* Clean up get_tapping_term function

Clean up function so that users don't need to call the event function, and instead only check the keycode

* Add ability to run functionality on and off

* Make ifdef's more compact

* port Massdrop CTRL/ALT to use RGB Matrix

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>

* Massdrop lighting support working

This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.

* Updating config based on testing results with patrickmt & compile errors

* Updates for PR5328

For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.

* remove prilik keymap form PR

This allows for constant, non-accelerated mouse movement, while retaining the original functionality. Configurable by a define.

* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Experimental LED support (untested)

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Added documentation

* Renamed feature to velocikey

* Reverted readme to original state

* Correct the readme title

* Updated feature name in the docs

* Update EECONFIG name

* Add compile-time toggles for velocikey

* Update feature documentation

* Revert "Merge branch 'led-support' into master"

This reverts commit e123ff5feb, reversing
changes made to df111a55b9.

* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE

* Rename decay_task function to decelerate

* Apply suggestions from code review

Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>

* Re-order eeconfig definitions

* Apply coding conventions

* Apply #ifdef check in lufa.c

* Refactored interval time checks into one functionc

* Small rename

* Fix unused function error for layouts not using all rgb effects

* Only update EEPROM if Velocikey is enabled

* Incorporate code review feedback

* Small adjustment to top-end decay rate

* Add Velocikey documentation to table of contents

* Bring tetris:default keymap size down by disabling audio

* Change Command keycode defaults to match corresponding Bootmagic codes

* Make alternate magic key keycodes consistent

* Reflect changes from previous commit in tmk_core/common/command.c

* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes

* Swap E and BSPACE for MAGIC_KEY_EEPROM

* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT

* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff

* Update Command descriptions

* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards

* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom

* haptic enhancement - eeprom and modes added

* Added set and get functions for haptic feedback

* initial implementation of solenoids under haptic feedback

* changed eeprom to 32 bits to reserve blocks for future features

* start documentation of haptic feedback

* change keycode per comment from reviewers

* typo fixes

* added eeprom for solenoid configs

* added solenoid and docs

* Add/fix default parameters configs, improve docs

* more doc cleanup

* add in solenoid buzz toggle, clean up doc

* some fixes for error in compiling solenoid

* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c

* fixes for avr side issues

* update keymap

* fix keymap compile error

* fix bugs found during solenoid testing

* set pin that is not powered during bootloader

* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader

* Add suspend functions

* Disable RGB code if it's disabled

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove suspend code

* Clean up docs

* Fix docs

* Fix suspend code

* more doc fixes

* change function to startup_* rather than keyboard_init_

* fix spelling error

* fix up docs to finish removing keyboard_init

* Use Pre and Post init functions

* Update Documenation

* Remove changes to my keymap and userspace code

* Cleanup

* Revert changes to extra files

* Forgot a semicolon

* Make sure all protocols call keyboard_setup

* Cleanup functions

* Unset startup_user

* Remove changes from division keyboard

* Readd startup_user function

* Remove all to startup_user

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Add suggestion line

* Rebase fixes

* Update documentation to be more useful/accurate

* Cleanup of documentation

* Fix spacing inconsistency

* Revert unexpected change to keymap

* Add stm32f072 base ck4x4 to handwired

* add prints

* Save these tries

* Save changes again

* Working hadron oled

* OLEd working but ws2812b still iffy:

* save another try

* Encoder feature + OLED

* RTC code

* Implement clock setting mode

* Whitespace

* Encoder hooked up to working LED PWM code

* Add missing files

* eeprom changes

* Save changes

* Move i2c master

* Move satisfaction75 under cannonkeys

* Set proper default folder

* Revert some core changes

* Undo paved iris changes

* Reorganize code for maintainability and prep for new features

* Add starting code for clock OLED mode

* Clock set mode finished

* Add custom encoder modes

* Actually add VIA keymap

* Gate to only 072

* fix gate for only 072

* Update header guards and includes

* Update i2c selection strategy

* Update board.c to handle software reset to DFU

* Added callbacks to one shot modifier changes

* Altered signature of callback functions

* Reordered the callback methods, shortened brief documentation

* Added One Shot Modifier callback documentation

* First attempt at unit tests

* Revert "First attempt at unit tests"

This reverts commit 5ec21a7822.

* Simplified oneshot function implementations

* Made clear_oneshot_locked_mods to be conform action_util.h, adhering to the (void) signature

* Made used datatypes for oneshot mods consistently unsigned integers

* Corrected callback to call clear callback when clear_oneshot_locked_mods is invoked

* Simplified oneshot equals statements

* Corrected return type and signature of get and set oneshot locked mods

* Consolidated one shot callbacks, added initial layer callback version

* Fixed non-updating one shot layer variable after timeout or other clear, added code comments

* Added better one shot key docs

* Change return type of layer_switch_get_layer() to uint8_t

* Keep loop index signed so we don't wrap around

* Move boards to cannonkeys and share resources

* Share common files between cannonkey boards

* Fix ortho60 keymap

* update LED numbers

* Add RGB keys to Ortho60 and Ortho48

* Add Backlight control to default layout Ortho60 and 48

* Remove unnecessary ws2812.c SRC from rules.mk