Tree:
ec78f8bca2
develop
gh-pages
master
riot
arm-dac-work
audio_out
better_chibios_wait
changelog
cmake-experiments
dd_joystick
dependabot/github_actions/actions/labeler-5
dependabot/pip/util/nix/pillow-10.3.0
deprecate_default_folder
docusaurus
edez2
eeprom_update
encoder_matrix
fix/just_return_false
gb_port
gc_switch
hidlamp
joystick_fixes
json_audio
json_custom_keycodes
keyboard_json_misc4
keyboard_overrides
kle2json_hyper
led_matrix_direct
list_maintainers
log_driver
make_cli_parsing
more_dd_eeprom
muon_light
muon_light_dc
peasy
peb
planck-ez-a5-high
planck_ez_wdg
planck_ez_with_5372
planck_light_rev2
planck_thk
post_sat75_updates
potentiometer
pre-develop-merge-nov20
python_optimizations
qmk_compile_build_keyboard
qmk_compile_improvements
qwiic_hub
qwiic_hud
rando_migrate1
refactor_process_record_kb_user
revert-17693-fix/pmw33xx-correct-angle-tune
rgb7seg
rm_solid_color
subatomic
subatomic_encoders
subvendor_ids
titmlb
unorthodox
xap
xmega_support
v4.0
user-keymaps-still-present
preonic-2.0
preonic-1.0
planck-light-1.0
planck-6.1
planck-6.0
planck-5.0
planck-4.2
planck-4.1
planck-4.0
gh60-0.1
ergodox_ez-161205
drop-1.0.0
breakpoint_2024_05_26
breakpoint_2024_02_25
breakpoint_2023_11_26
breakpoint_2023_08_27
breakpoint_2023_05_28
breakpoint_2023_02_26
breakpoint_2022_11_26
breakpoint_2022_08_27
breakpoint_2022_05_28
breakpoint_2021_11_27
breakpoint_2021_08_28
breakpoint_2021_05_29
breakpoint_2020_02_29
breakpoint_2019_11_30
breakpoint_2019_08_30
LUFA-170418
LUFA-151115
LUFA-140928
LUFA-140302
LUFA-130901-BETA
LUFA-130901
LUFA-111009
0.9.9
0.9.8
0.9.7
0.9.6
0.9.59
0.9.58
0.9.57
0.9.56
0.9.55
0.9.54
0.9.53
0.9.52
0.9.51
0.9.50
0.9.5
0.9.49
0.9.48
0.9.47
0.9.46
0.9.45
0.9.44
0.9.43
0.9.42
0.9.41
0.9.40
0.9.4
0.9.39
0.9.38
0.9.37
0.9.36
0.9.35
0.9.34
0.9.33
0.9.32
0.9.31
0.9.30
0.9.3
0.9.29
0.9.28
0.9.27
0.9.26
0.9.25
0.9.24
0.9.23
0.9.22
0.9.21
0.9.20
0.9.2
0.9.19
0.9.18
0.9.17
0.9.16
0.9.15
0.9.14
0.9.13
0.9.12
0.9.11
0.9.10
0.9.1
0.9.0
0.8.99
0.8.98
0.8.97
0.8.96
0.8.95
0.8.94
0.8.93
0.8.92
0.8.91
0.8.90
0.8.9
0.8.89
0.8.88
0.8.87
0.8.86
0.8.85
0.8.84
0.8.83
0.8.82
0.8.81
0.8.80
0.8.8
0.8.79
0.8.78
0.8.77
0.8.76
0.8.75
0.8.74
0.8.73
0.8.72
0.8.71
0.8.70
0.8.7
0.8.69
0.8.68
0.8.67
0.8.66
0.8.65
0.8.64
0.8.63
0.8.62
0.8.61
0.8.60
0.8.6
0.8.59
0.8.58
0.8.57
0.8.56
0.8.55
0.8.54
0.8.53
0.8.52
0.8.51
0.8.50
0.8.5
0.8.49
0.8.48
0.8.47
0.8.46
0.8.45
0.8.44
0.8.43
0.8.42
0.8.41
0.8.40
0.8.4
0.8.39
0.8.38
0.8.37
0.8.36
0.8.35
0.8.34
0.8.33
0.8.32
0.8.31
0.8.30
0.8.3
0.8.29
0.8.28
0.8.27
0.8.26
0.8.25
0.8.24
0.8.23
0.8.22
0.8.21
0.8.20
0.8.2
0.8.192
0.8.191
0.8.190
0.8.19
0.8.189
0.8.188
0.8.187
0.8.186
0.8.185
0.8.184
0.8.183
0.8.182
0.8.181
0.8.180
0.8.18
0.8.179
0.8.178
0.8.177
0.8.176
0.8.175
0.8.174
0.8.173
0.8.172
0.8.171
0.8.170
0.8.17
0.8.169
0.8.168
0.8.167
0.8.166
0.8.165
0.8.164
0.8.163
0.8.162
0.8.161
0.8.160
0.8.16
0.8.159
0.8.158
0.8.157
0.8.156
0.8.155
0.8.154
0.8.153
0.8.152
0.8.151
0.8.150
0.8.15
0.8.149
0.8.148
0.8.147
0.8.146
0.8.145
0.8.144
0.8.143
0.8.142
0.8.141
0.8.140
0.8.14
0.8.139
0.8.138
0.8.137
0.8.136
0.8.135
0.8.134
0.8.133
0.8.132
0.8.131
0.8.130
0.8.13
0.8.129
0.8.128
0.8.127
0.8.126
0.8.125
0.8.124
0.8.123
0.8.122
0.8.121
0.8.120
0.8.12
0.8.119
0.8.118
0.8.117
0.8.116
0.8.115
0.8.114
0.8.113
0.8.112
0.8.111
0.8.110
0.8.11
0.8.109
0.8.108
0.8.107
0.8.106
0.8.105
0.8.104
0.8.103
0.8.102
0.8.101
0.8.100
0.8.10
0.8.1
0.8.0
0.7.99
0.7.98
0.7.97
0.7.96
0.7.95
0.7.94
0.7.93
0.7.92
0.7.91
0.7.90
0.7.9
0.7.89
0.7.88
0.7.87
0.7.86
0.7.85
0.7.84
0.7.83
0.7.82
0.7.81
0.7.80
0.7.8
0.7.79
0.7.78
0.7.77
0.7.76
0.7.75
0.7.74
0.7.73
0.7.72
0.7.71
0.7.70
0.7.7
0.7.69
0.7.68
0.7.67
0.7.66
0.7.65
0.7.64
0.7.63
0.7.62
0.7.61
0.7.60
0.7.6
0.7.59
0.7.58
0.7.57
0.7.56
0.7.55
0.7.54
0.7.53
0.7.52
0.7.51
0.7.50
0.7.5
0.7.49
0.7.48
0.7.47
0.7.46
0.7.45
0.7.44
0.7.43
0.7.42
0.7.41
0.7.40
0.7.4
0.7.39
0.7.38
0.7.37
0.7.36
0.7.35
0.7.34
0.7.33
0.7.32
0.7.31
0.7.30
0.7.3
0.7.29
0.7.28
0.7.27
0.7.26
0.7.25
0.7.24
0.7.23
0.7.22
0.7.21
0.7.20
0.7.2
0.7.19
0.7.18
0.7.172
0.7.171
0.7.170
0.7.17
0.7.169
0.7.168
0.7.167
0.7.166
0.7.165
0.7.164
0.7.163
0.7.162
0.7.161
0.7.160
0.7.16
0.7.159
0.7.158
0.7.157
0.7.156
0.7.155
0.7.154
0.7.153
0.7.152
0.7.151
0.7.150
0.7.15
0.7.149
0.7.148
0.7.147
0.7.146
0.7.145
0.7.144
0.7.143
0.7.142
0.7.141
0.7.140
0.7.14
0.7.139
0.7.138
0.7.137
0.7.136
0.7.135
0.7.134
0.7.133
0.7.132
0.7.131
0.7.130
0.7.13
0.7.129
0.7.128
0.7.127
0.7.126
0.7.125
0.7.124
0.7.123
0.7.122
0.7.121
0.7.120
0.7.12
0.7.119
0.7.118
0.7.117
0.7.116
0.7.115
0.7.114
0.7.113
0.7.112
0.7.111
0.7.110
0.7.11
0.7.109
0.7.108
0.7.107
0.7.106
0.7.105
0.7.104
0.7.103
0.7.102
0.7.101
0.7.100
0.7.10
0.7.1
0.7.0
0.6.99
0.6.98
0.6.97
0.6.96
0.6.95
0.6.94
0.6.93
0.6.92
0.6.91
0.6.90
0.6.9
0.6.89
0.6.88
0.6.87
0.6.86
0.6.85
0.6.84
0.6.83
0.6.82
0.6.81
0.6.80
0.6.8
0.6.79
0.6.78
0.6.77
0.6.76
0.6.75
0.6.74
0.6.73
0.6.72
0.6.71
0.6.70
0.6.7
0.6.69
0.6.68
0.6.67
0.6.66
0.6.65
0.6.64
0.6.63
0.6.62
0.6.61
0.6.60
0.6.6
0.6.59
0.6.58
0.6.57
0.6.56
0.6.55
0.6.54
0.6.53
0.6.52
0.6.51
0.6.50
0.6.5
0.6.49
0.6.48
0.6.47
0.6.464
0.6.463
0.6.462
0.6.461
0.6.460
0.6.46
0.6.459
0.6.458
0.6.457
0.6.456
0.6.455
0.6.454
0.6.453
0.6.452
0.6.451
0.6.450
0.6.45
0.6.449
0.6.448
0.6.447
0.6.446
0.6.445
0.6.444
0.6.443
0.6.442
0.6.441
0.6.440
0.6.44
0.6.439
0.6.438
0.6.437
0.6.436
0.6.435
0.6.434
0.6.433
0.6.432
0.6.431
0.6.430
0.6.43
0.6.429
0.6.428
0.6.427
0.6.426
0.6.425
0.6.424
0.6.423
0.6.422
0.6.421
0.6.420
0.6.42
0.6.419
0.6.418
0.6.417
0.6.416
0.6.415
0.6.414
0.6.413
0.6.412
0.6.411
0.6.410
0.6.41
0.6.409
0.6.408
0.6.407
0.6.406
0.6.405
0.6.404
0.6.403
0.6.402
0.6.401
0.6.400
0.6.40
0.6.4
0.6.399
0.6.398
0.6.397
0.6.396
0.6.395
0.6.394
0.6.393
0.6.392
0.6.391
0.6.390
0.6.39
0.6.389
0.6.388
0.6.387
0.6.386
0.6.385
0.6.384
0.6.383
0.6.382
0.6.381
0.6.380
0.6.38
0.6.379
0.6.378
0.6.377
0.6.376
0.6.375
0.6.374
0.6.373
0.6.372
0.6.371
0.6.370
0.6.37
0.6.369
0.6.368
0.6.367
0.6.366
0.6.365
0.6.364
0.6.363
0.6.362
0.6.361
0.6.360
0.6.36
0.6.359
0.6.358
0.6.357
0.6.356
0.6.355
0.6.354
0.6.353
0.6.352
0.6.351
0.6.350
0.6.35
0.6.349
0.6.348
0.6.347
0.6.346
0.6.345
0.6.344
0.6.343
0.6.342
0.6.341
0.6.340
0.6.34
0.6.339
0.6.338
0.6.337
0.6.336
0.6.335
0.6.334
0.6.333
0.6.332
0.6.331
0.6.330
0.6.33
0.6.329
0.6.328
0.6.327
0.6.326
0.6.325
0.6.324
0.6.323
0.6.322
0.6.321
0.6.320
0.6.32
0.6.319
0.6.318
0.6.317
0.6.316
0.6.315
0.6.314
0.6.313
0.6.312
0.6.311
0.6.310
0.6.31
0.6.309
0.6.308
0.6.307
0.6.306
0.6.305
0.6.304
0.6.303
0.6.302
0.6.301
0.6.300
0.6.30
0.6.3
0.6.299
0.6.298
0.6.297
0.6.296
0.6.295
0.6.294
0.6.293
0.6.292
0.6.291
0.6.290
0.6.29
0.6.289
0.6.288
0.6.287
0.6.286
0.6.285
0.6.284
0.6.283
0.6.282
0.6.281
0.6.280
0.6.28
0.6.279
0.6.278
0.6.277
0.6.276
0.6.275
0.6.274
0.6.273
0.6.272
0.6.271
0.6.270
0.6.27
0.6.269
0.6.268
0.6.267
0.6.266
0.6.265
0.6.264
0.6.263
0.6.262
0.6.261
0.6.260
0.6.26
0.6.259
0.6.258
0.6.257
0.6.256
0.6.255
0.6.254
0.6.253
0.6.252
0.6.251
0.6.250
0.6.25
0.6.249
0.6.248
0.6.247
0.6.246
0.6.245
0.6.244
0.6.243
0.6.242
0.6.241
0.6.240
0.6.24
0.6.239
0.6.238
0.6.237
0.6.236
0.6.235
0.6.234
0.6.233
0.6.232
0.6.231
0.6.230
0.6.23
0.6.229
0.6.228
0.6.227
0.6.226
0.6.225
0.6.224
0.6.223
0.6.222
0.6.221
0.6.220
0.6.22
0.6.219
0.6.218
0.6.217
0.6.216
0.6.215
0.6.214
0.6.213
0.6.212
0.6.211
0.6.210
0.6.21
0.6.209
0.6.208
0.6.207
0.6.206
0.6.205
0.6.204
0.6.203
0.6.202
0.6.201
0.6.200
0.6.20
0.6.2
0.6.199
0.6.198
0.6.197
0.6.196
0.6.195
0.6.194
0.6.193
0.6.192
0.6.191
0.6.190
0.6.19
0.6.189
0.6.188
0.6.187
0.6.186
0.6.185
0.6.184
0.6.183
0.6.182
0.6.181
0.6.180
0.6.18
0.6.179
0.6.178
0.6.177
0.6.176
0.6.175
0.6.174
0.6.173
0.6.172
0.6.171
0.6.170
0.6.17
0.6.169
0.6.168
0.6.167
0.6.166
0.6.165
0.6.164
0.6.163
0.6.162
0.6.161
0.6.160
0.6.16
0.6.159
0.6.158
0.6.157
0.6.156
0.6.155
0.6.154
0.6.153
0.6.152
0.6.151
0.6.150
0.6.15
0.6.149
0.6.148
0.6.147
0.6.146
0.6.145
0.6.144
0.6.143
0.6.142
0.6.141
0.6.140
0.6.14
0.6.139
0.6.138
0.6.137
0.6.136
0.6.135
0.6.134
0.6.133
0.6.132
0.6.131
0.6.130
0.6.13
0.6.129
0.6.128
0.6.127
0.6.126
0.6.125
0.6.124
0.6.123
0.6.122
0.6.121
0.6.120
0.6.12
0.6.119
0.6.118
0.6.117
0.6.116
0.6.115
0.6.114
0.6.113
0.6.112
0.6.111
0.6.110
0.6.11
0.6.109
0.6.108
0.6.107
0.6.106
0.6.105
0.6.104
0.6.103
0.6.102
0.6.101
0.6.100
0.6.10
0.6.1
0.6.0
0.5.99
0.5.98
0.5.97
0.5.96
0.5.95
0.5.94
0.5.93
0.5.92
0.5.91
0.5.90
0.5.9
0.5.89
0.5.88
0.5.87
0.5.86
0.5.85
0.5.84
0.5.83
0.5.82
0.5.81
0.5.80
0.5.8
0.5.79
0.5.78
0.5.77
0.5.76
0.5.75
0.5.74
0.5.73
0.5.72
0.5.71
0.5.70
0.5.7
0.5.69
0.5.68
0.5.67
0.5.66
0.5.65
0.5.64
0.5.63
0.5.62
0.5.61
0.5.60
0.5.6
0.5.59
0.5.58
0.5.57
0.5.56
0.5.55
0.5.54
0.5.53
0.5.52
0.5.51
0.5.50
0.5.5
0.5.49
0.5.48
0.5.47
0.5.46
0.5.45
0.5.44
0.5.43
0.5.42
0.5.41
0.5.40
0.5.4
0.5.39
0.5.38
0.5.37
0.5.36
0.5.35
0.5.34
0.5.33
0.5.32
0.5.31
0.5.30
0.5.3
0.5.29
0.5.28
0.5.27
0.5.264
0.5.263
0.5.262
0.5.261
0.5.260
0.5.26
0.5.259
0.5.258
0.5.257
0.5.256
0.5.255
0.5.254
0.5.253
0.5.252
0.5.251
0.5.250
0.5.25
0.5.249
0.5.248
0.5.247
0.5.246
0.5.245
0.5.244
0.5.243
0.5.242
0.5.241
0.5.240
0.5.24
0.5.239
0.5.238
0.5.237
0.5.236
0.5.235
0.5.234
0.5.233
0.5.232
0.5.231
0.5.230
0.5.23
0.5.229
0.5.228
0.5.227
0.5.226
0.5.225
0.5.224
0.5.223
0.5.222
0.5.221
0.5.220
0.5.22
0.5.219
0.5.218
0.5.217
0.5.216
0.5.215
0.5.214
0.5.213
0.5.212
0.5.211
0.5.210
0.5.21
0.5.209
0.5.208
0.5.207
0.5.206
0.5.205
0.5.204
0.5.203
0.5.202
0.5.201
0.5.200
0.5.20
0.5.2
0.5.199
0.5.198
0.5.197
0.5.196
0.5.195
0.5.194
0.5.193
0.5.192
0.5.191
0.5.190
0.5.189
0.5.188
0.5.187
0.5.186
0.5.185
0.5.184
0.5.183
0.5.182
0.5.181
0.5.180
0.5.179
0.5.178
0.5.177
0.5.176
0.5.175
0.5.174
0.5.173
0.5.172
0.5.171
0.5.170
0.5.17
0.5.169
0.5.168
0.5.167
0.5.166
0.5.165
0.5.164
0.5.163
0.5.162
0.5.161
0.5.160
0.5.16
0.5.159
0.5.158
0.5.157
0.5.156
0.5.155
0.5.154
0.5.153
0.5.152
0.5.151
0.5.150
0.5.15
0.5.149
0.5.148
0.5.147
0.5.146
0.5.145
0.5.144
0.5.143
0.5.142
0.5.141
0.5.140
0.5.14
0.5.139
0.5.138
0.5.137
0.5.136
0.5.135
0.5.134
0.5.133
0.5.132
0.5.131
0.5.130
0.5.13
0.5.129
0.5.128
0.5.127
0.5.126
0.5.125
0.5.124
0.5.123
0.5.122
0.5.121
0.5.120
0.5.12
0.5.119
0.5.118
0.5.117
0.5.116
0.5.115
0.5.114
0.5.113
0.5.112
0.5.111
0.5.110
0.5.11
0.5.109
0.5.108
0.5.107
0.5.106
0.5.105
0.5.104
0.5.103
0.5.102
0.5.101
0.5.100
0.5.10
0.5.1
0.5.0
0.25.4
0.25.3
0.25.2
0.25.1
0.25.0
0.24.9
0.24.8
0.24.7
0.24.6
0.24.5
0.24.4
0.24.3
0.24.2
0.24.11
0.24.10
0.24.1
0.24.0
0.23.9
0.23.8
0.23.7
0.23.6
0.23.5
0.23.4
0.23.3
0.23.2
0.23.1
0.23.0
0.22.9
0.22.8
0.22.7
0.22.6
0.22.5
0.22.4
0.22.3
0.22.2
0.22.14
0.22.13
0.22.12
0.22.11
0.22.10
0.22.1
0.22.0
0.21.7
0.21.6
0.21.5
0.21.4
0.21.3
0.21.2
0.21.1
0.21.0
0.20.8
0.20.7
0.20.6
0.20.5
0.20.4
0.20.3
0.20.2
0.20.1
0.20.0
0.19.9
0.19.8
0.19.7
0.19.6
0.19.5
0.19.4
0.19.3
0.19.2
0.19.12
0.19.11
0.19.10
0.19.1
0.19.0
0.18.9
0.18.8
0.18.7
0.18.6
0.18.5
0.18.4
0.18.3
0.18.2
0.18.17
0.18.16
0.18.15
0.18.14
0.18.13
0.18.12
0.18.11
0.18.10
0.18.1
0.18.0
0.17.9
0.17.8
0.17.7
0.17.6
0.17.5
0.17.4
0.17.3
0.17.2
0.17.1
0.17.0
0.16.9
0.16.8
0.16.7
0.16.6
0.16.5
0.16.4
0.16.3
0.16.2
0.16.1
0.16.0
0.15.9
0.15.8
0.15.7
0.15.6
0.15.5
0.15.4
0.15.3
0.15.25
0.15.24
0.15.23
0.15.22
0.15.21
0.15.20
0.15.2
0.15.19
0.15.18
0.15.17
0.15.16
0.15.15
0.15.14
0.15.13
0.15.12
0.15.11
0.15.10
0.15.1
0.15.0
0.14.9
0.14.8
0.14.7
0.14.6
0.14.5
0.14.4
0.14.33
0.14.32
0.14.31
0.14.30
0.14.3
0.14.29
0.14.28
0.14.27
0.14.26
0.14.25
0.14.24
0.14.23
0.14.22
0.14.21
0.14.20
0.14.2
0.14.19
0.14.18
0.14.17
0.14.16
0.14.15
0.14.14
0.14.13
0.14.12
0.14.11
0.14.10
0.14.1
0.14.0
0.13.9
0.13.8
0.13.7
0.13.6
0.13.5
0.13.4
0.13.38
0.13.37
0.13.36
0.13.35
0.13.34
0.13.33
0.13.32
0.13.31
0.13.30
0.13.3
0.13.29
0.13.28
0.13.27
0.13.26
0.13.25
0.13.24
0.13.23
0.13.22
0.13.21
0.13.20
0.13.2
0.13.19
0.13.18
0.13.17
0.13.16
0.13.15
0.13.14
0.13.13
0.13.12
0.13.11
0.13.10
0.13.1
0.13.0
0.12.9
0.12.8
0.12.7
0.12.6
0.12.52
0.12.51
0.12.50
0.12.5
0.12.49
0.12.48
0.12.47
0.12.46
0.12.45
0.12.44
0.12.43
0.12.42
0.12.41
0.12.40
0.12.4
0.12.39
0.12.38
0.12.37
0.12.36
0.12.35
0.12.34
0.12.33
0.12.32
0.12.31
0.12.30
0.12.3
0.12.29
0.12.28
0.12.27
0.12.26
0.12.25
0.12.24
0.12.23
0.12.22
0.12.21
0.12.20
0.12.2
0.12.19
0.12.18
0.12.17
0.12.16
0.12.15
0.12.14
0.12.13
0.12.12
0.12.11
0.12.10
0.12.1
0.12.0
0.11.9
0.11.8
0.11.70
0.11.7
0.11.69
0.11.68
0.11.67
0.11.66
0.11.65
0.11.64
0.11.63
0.11.62
0.11.61
0.11.60
0.11.6
0.11.59
0.11.58
0.11.57
0.11.56
0.11.55
0.11.54
0.11.53
0.11.52
0.11.51
0.11.50
0.11.5
0.11.49
0.11.48
0.11.47
0.11.46
0.11.45
0.11.44
0.11.43
0.11.42
0.11.41
0.11.40
0.11.4
0.11.39
0.11.38
0.11.37
0.11.36
0.11.35
0.11.34
0.11.33
0.11.32
0.11.31
0.11.30
0.11.3
0.11.29
0.11.28
0.11.27
0.11.26
0.11.25
0.11.24
0.11.23
0.11.22
0.11.21
0.11.20
0.11.2
0.11.19
0.11.18
0.11.17
0.11.16
0.11.15
0.11.14
0.11.13
0.11.12
0.11.11
0.11.10
0.11.1
0.11.0
0.10.9
0.10.8
0.10.7
0.10.6
0.10.54
0.10.53
0.10.52
0.10.51
0.10.50
0.10.5
0.10.49
0.10.48
0.10.47
0.10.46
0.10.45
0.10.44
0.10.43
0.10.42
0.10.41
0.10.40
0.10.4
0.10.39
0.10.38
0.10.37
0.10.36
0.10.35
0.10.34
0.10.33
0.10.32
0.10.31
0.10.30
0.10.3
0.10.29
0.10.28
0.10.27
0.10.26
0.10.25
0.10.24
0.10.23
0.10.22
0.10.21
0.10.20
0.10.2
0.10.19
0.10.18
0.10.17
0.10.16
0.10.15
0.10.14
0.10.13
0.10.12
0.10.11
0.10.10
0.10.1
0.10.0
0.25.7
0.25.6
0.25.5
117 Commits (ec78f8bca2523a91a293d8ae4d61050d1e36b320)
117 Commits (ec78f8bca2523a91a293d8ae4d61050d1e36b320)
| Author | SHA1 | Message | Date |
|---|---|---|---|
 Ryan
|
99f637e82c
|
Fix some RGB Matrix-enabled keymaps referring to RGBLight mode (#13509) | 2 years ago |
 Drashna Jaelre
|
4f3a4eca97
|
[Keymap] Fix Corne Via Layout properly (#13518) | 2 years ago |
|
Drashna Jaelre
|
09474cbf04
|
Fix VIA compilation issues for RGB Matrix (#13503) | 2 years ago |
 Manna Harbour
|
65f8da3034
|
[Keymap] Update Miryoku (#13307)
Fix reddit link Duplicate open parenthesis next to close parenthesis on NSSL Add customisation instructions Add lily58 Add gergo Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com> Clean up LAYOUT macro formatting Add alternative vi-style navigation layout Add kyria Add minidox Change order of keyboards Add iris Expand TOC Re-order userspace subheadings Add atreus Add customisation section Add split_3x5_3 and split_3x6_3 layouts Add for_science Fix wrong paths in keyboard config.h and keymap.c headings Fix keyboard ordering Fix blank lines around headings Add compatibility with new org-mode version. Remove keyboards/crkbd now covered by layouts/split_3x6_3 Add Halmak Alphabetise alternative alpha arrangements Move build options out of base layer alphas headings Add list of keyboards supporting split_3x5_3 layout Enable Auto Shift and Retro Shift Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping) Change kyria thumb key mapping Add planck_mit layout Remove alternative bottom row support from ortho_4x12 Remove minidox - Covered by split_3x5_3 layout Add moonlander Remove KC_ macros Add 60_ansi layout Add ortho_5x15 layout Closes manna-harbour/qmk_firmware#5 Co-authored-by: Rob <rob@debank.tv> Fix typo (manna-harbour/qmk_firmware#7) Author: sonnius <sonnius@users.noreply.github.com> Add redox_w (manna-harbour/qmk_firmware#8) Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Add AUTO_SHIFT_NO_SETUP to reduce firmware size Update image paths Add instructions to checkout development branch Add kyria extended thumbs option, change default, add KLE Change clipboard keys - Change order to be mirror of windows bindings - Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster bindings for Undo and Redo - Add alternative bindings - Fun Cluster (original miryoku bindings) - Mac - Windows - Change prefix for local macros from X_ to U_ Disable Retro Shift, enable Auto Shift for non-alphas Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)" Add Experimental Features section Update miryoku image link Update cover image link Add dactyl_manuform/4x5 Add cutomisation examples Add https to remote example Fix dactyl_manuform/4x5 subset mapping Add extended thumbs to ortho_4x12 Update Colemak Mod-DH naming Closes manna-harbour/qmk_firmware#13 Add dactyl_manuform/5x6 Resolves manna-harbour/qmk_firmware#14 Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com> Add note on FORCE_LAYOUT - Needed to use EXTENDED_THUMBS on planck Add parent directories to keyboard headings and re-order Add keyboardio/atreus Resolves manna-harbour/qmk_firmware#15 Add torn Resolves manna-harbour/qmk_firmware#16 Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Change map to zip - Adds support for python3, still compatible with python2. Resolves manna-harbour/qmk_firmware#10 Resolves manna-harbour/qmk_firmware#19 Co-authored-by: Ori <ori@oribarbut.com> Add python-version Add sofle Add ergotravel Add ortho_5x12 Add ortho_4x10 Add :main no header argument to C code blocks resolves manna-harbour/qmk_firmware#11 resolves manna-harbour/qmk_firmware#12 Co-authored-by: RubioJr9 <u0893472@utah.edu> Add flipped layers and inverted-T nav alternative layouts - Separate tap_table into alphas_table and thumbs_table - Add mode argument to table-layout-half - Remove layer_name - Rename layers - Add mods and clipboard to MBO and mirror - Add MIRYOKU_LAYERS=FLIP - Add MIRYOKU_NAV=INVERTEDT Add layer diagrams Update contact section Update links for Bilateral Combinations and Retro Shift Add description and no reverse angle option to 60_ansi layout Update list of keyboards supporting community layouts - and example build command lines Change moonlander thumb keys Update list of keyboards supporting split_3x5_3 Add license to tangled C source files |
2 years ago |
 David Rambo
|
170de06475
|
[Keymap] Update personal keymaps, add Corne keymap, and update non-kc LAYOUT for Iris (#12273)
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> |
2 years ago |
 Tyler Thrailkill
|
4a15eb593d
|
snowe keymap/userspace and Ocean Dream animation (#12477)
* Add snowe keymap/userspace & Ocean Dream animation * Add snowe userspace with keymap wrappers and two animations * Add crkbd keymap * Add Ocean Dream animation, a cool full screen animation with: * * twinkling stars * * meteor showers * * ocean waves * * island with palm tree * * moon with phases * Disable Luna so travis build succeeds. * Add more copyrights * Add pragma once to keycode_aliases.h Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Drashna Jaelre <drashna@live.com> |
2 years ago |
 James Young
|
1646c0f26c
|
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only |
3 years ago |
 DaneEvans
|
9da95bc3ab
|
[Keymap] add personal keymap files, and sofle_rgb default maps, (#12267) | 3 years ago |
 Oliver Ocean
|
4dd5f45b6c
|
[Keymap] Crkbd/keymaps/oo (#12882) | 3 years ago |
 MarioCorona
|
c32264d9b7
|
mcrown crkbd new keymap (#12092)
Co-authored-by: Erovia <Erovia@users.noreply.github.com> |
3 years ago |
 Ryo Maeda
|
3dbb7f261d
|
[Keymap] Remove LAYOUT_kc macros from edvorakjp keymaps (#12217) | 3 years ago |
 Armando Magalhães
|
c59fb1b477
|
feat(keymaps): Changes to crkbd/keymaps/armand1m layout and README.md update (#12252)
Co-authored-by: Ryan <fauxpark@gmail.com> |
3 years ago |
|
Armando Magalhães
|
2aa38f5bd3
|
[Keymap] add crkbd/keymaps/armand1m (#12098) | 3 years ago |
|
Drashna Jaelre
|
c80e5f9f88
|
Audio system overhaul (#11820)
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) |
3 years ago |
 Xyverz
|
59d499edd3
|
Xyverz bastyl (#11662)
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld> |
3 years ago |
 Rob Hilgefort
|
8e70c4d943
|
[Keymap] rjhilgefort's Corne KBD (#11381)
* initial crkbd rjhilgefort keymap * finished v1 of rjhilgefort's crkbd keymap * Update keyboards/crkbd/keymaps/rjhilgefort/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/rjhilgefort/readme.md * Update keyboards/crkbd/keymaps/rjhilgefort/readme.md * Update keyboards/crkbd/keymaps/rjhilgefort/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> |
3 years ago |
|
Xyverz
|
832a6e150a
|
[Keymap] Xyverz's crkbd keymap (#11299)
* Initial commit for my Corne keyboard layout. * Updates to Corne, etc. Finished working on primary layout for Corne keyboard. Cleaned up some comments for my 4x12 Ortho layout. * Changes for crkbd layout * Fixed the config.h to reflect using ee_hands * Added RGB configs to crkbd/corne layout Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld> |
3 years ago |
|
Ryan
|
9366ed7282
|
Normalise include statements in keyboard code (#11185) | 3 years ago |
|
James Young
|
c66df16644
|
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change |
3 years ago |
 Sid Carter
|
1bf657be41
|
[Keymap] Updates - Unikorn/Curiosity/Prime_E/Ferris/Corne (#10925)
* update keymap for unikorn * add new map * update keymap * update keymap * update map * update the current keymap * update keymap so it accounts for mouse keys as well * add extra control and shift, for when we need to use the other keys * get me square and curly braces * remove unused macros * update these changes so far * update ilpse keymap * rmove a layer and simplify my layers a bit * I think there's a working keymap now for the corne. let's leave this here. * I thought maybe that helped? but who knows * save changes made so far * update madhatter keymap to match what I want * switch to use lcmd for main alt * update my curiosity keymap * make curiosity via enabled * add via keymap * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * stick to enum * add bootmagic stuff and update keymap * switch to bootmagic lite * fix typo * cleanup for writing to LED * consistency * fix led pins * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * fix build issue * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/crkbd/keymaps/madhatter/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Khader Syed <khader.syed@aicure.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> |
3 years ago |
 Kosuke Adachi
|
503b762538
|
Refactor the crkbd/via keymap and fix OLED bugs (#10354)
* Refactor the crkbd/via keymap and fix OLED bugs
* Revert "Refactor the crkbd/via keymap and fix OLED bugs"
This reverts commit
|
3 years ago |
 Jonathan Rascher
|
b5ebdf1b3a
|
[Keymap] bcat keymaps and userspace (#10705)
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks * Remove outdated Crkbd Ctrl key positioning info * Add Left Alt key to Lily58 keymap * Lily58 no longer overrides default TAPPING_TERM * Refactor Crkbd keymap to use new community layout * Fix underglow animations for Crkbd w/ Split Common * Add initial Eco keymap * Update outdated reference to Crkbd layout * Add keymap links to userspace readme * Add copyright notices to files changed in this PR |
3 years ago |
|
Drashna Jaelre
|
855dd2d218
|
[Keymap] Drashna Code Cleanup (#10656)
* Add Launchpad keymap Note: RGB and Audio won't work when using B pins for audio * Add support for rgb matrix on launchpad * Update config for launchpag * Disable wait on layer change * Update config for ErgoDox EZ * Fixup rgb light userspace code * Move Corne layout to community layouts folder * Update config for corne to support community layouts * Add license header to files * Minor cleanup of userspace config * Update Pimironi Trackball code * Increase debounce time on ergodox * Fix keymap handling * Enable wait for USB for moonlander * Update/add license headers * fix review issues |
3 years ago |
|
Jonathan Rascher
|
342ab6ab80
|
Update bcat keymaps for crkbd and lily58(#10298)
* Swap ergo lower layer shortcuts for zoom keys |
3 years ago |
|
Drashna Jaelre
|
f37a134f71
|
[Keyboard] Convert Corne Keyboard to Split Common (#6001)
* [Keyboard] Convert Corne Keyboard to Split Common * Add VIA Support * Makes sure that ol(e)d and new OLED implementation can't coexist * Add licensing header to files * Add changes based on feedback from foostan * Fixes |
3 years ago |
|
Drashna Jaelre
|
92385b3fb6 |
Better handle LTO_ENABLE (#9832)
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk |
3 years ago |
 Danilo de Klerk
|
c8b721d7c6
|
split_3x5_3 layout support (#9624)
* Add split_3x5_3 support to Minidox * Add split_3x5_3 support to Miniaxe * Add LAYOUT_mini to Centromere This layout macro removes the need or KC_NO keycodes in the keymap. * Add split_3x5_3 support to Centromere * Add split_3x5_3 support to suihankey split * Add LAYOUT_mini to centromere/info.json * Add LAYOUT_mini to crkbd * Add split_3x5_3 support to crkbd * Change mini layout names * Rename main layouts for split_3x6_3 keyboards * Use split_3x5_3 macro for remaining keyboards * Update relevant info.json files * Fix suihankey/split/alpha macro * Add layout aliases for suihankey |
3 years ago |
|
Jonathan Rascher
|
d699fd1fb4
|
Switch bcat Chrome OS media keys workaround from mouse keys to NKRO (#9790)
* Switch Chrome OS mouse keys workaround to NKRO * Add NKRO toggle to keymaps * USE NK_TOGG keycode instead of defining my own |
3 years ago |
|
Jonathan Rascher
|
027570a21b
|
Rework bcat Crkbd and Lily58 modifier keys (#9692)
* Re-enable mouse keys to fix Chrome OS media keys I'm not sure if there's a bug in Chrome OS, QMK, or both, but EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS. Instead, MOUSEKEY_ENABLE is also required. * Remove unnecessary SPLIT_USB_DETECT for Lily58 I've since swapped my Lily58 back to Elite-C v2 controllers with working VBUS detection. * Move Crkbd Esc and Ctrl keys; add some shortcuts * Move MC_ALTT to userspace for cross-board support * Sync Lily58 keymap with Crkbd * Fix typos |
3 years ago |
|
Manna Harbour
|
f0bde7906d
|
Update miryoku (#9442)
- Add mouse buttons overlay layer - Change button order - Remove crkbd hardware specifics - Add alternative base layer alphas - Change title - Add logo - Reword intro text - Add dev branch and new commits links - Replace manual toc and remove anchors - Unindent lists - Reduce headings - Update docs - Build keymap as object instead of including .c file - Add kle subset mapping images - Add alternative mapping support - Change default mapping for ortho_4x12 - Add split mapping for ortho_4x12 - Add contact section - Add #pragma once to layout and keyboard config.h |
4 years ago |
|
Drashna Jaelre
|
357a888d80
|
[Keymap] Drashna's Keymap Update - Display Edition (#9282)
OLED Display fixes Add support for RGBLIGHT Layers Add gaming layer to corn and kyria RGBLight Startup Animation fixes and improvements (uses matrix_scan now!) Pimoroni Trackball support added (IT'S RGB!!!) Fix issues due to code changes |
4 years ago |
|
Sid Carter
|
307013a2f8
|
[Keymap] Personal keymaps for Prime_E, Corne, Space65 and updates (#9234)
* initial draft maps * updates to the keymap to enable LED * does one still have to do these shenanigans? * update keymap with lights * update OLED stuff * update corne config * update singav3 pcb config * update ilpse config and map * update prime keymap as well * update the keymap for prime_e * update tapping term and keymap * switch numbers to the raise layer * move nav to lower * add mousekeys as well * some fixes * update keymap * add my layout for space65 * update map * update keymap * add grave key * update config for my keymap * update keymap * switch to newer mechanisms * grave on capslock * cleanup * udpate config * update keymap * Update keyboards/gray_studio/space65/keymaps/madhatter/rules.mk * Update keyboards/gray_studio/space65/keymaps/madhatter/keymap.c * Update keyboards/crkbd/keymaps/madhatter/rules.mk * Update keyboards/crkbd/keymaps/madhatter/rules.mk * Update keyboards/gray_studio/space65/keymaps/madhatter/keymap.c * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/primekb/prime_e/keymaps/madhatter/config.h * Update keyboards/gray_studio/space65/keymaps/madhatter/config.h * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/wilba_tech/wt75_b/keymaps/madhatter/config.h * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/gray_studio/space65/keymaps/madhatter/config.h * Update keyboards/primekb/prime_e/keymaps/madhatter/config.h * Update keyboards/wilba_tech/wt75_b/keymaps/madhatter/config.h * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/crkbd/keymaps/madhatter/keymap.c * Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c * Update keyboards/crkbd/keymaps/madhatter/readme.md * remove file I don't use |
4 years ago |
 Gautham Yerroju
|
2bfcb6bfc5
|
[Keymap] Add custom corne keymap (#9283)
* Add custom corne keymap * Clean up rules.mk * Clean up base layer on keymap.c * Clean up lower layer on keymap.c * Clean up raise layer on keymap.c * Clean up adjust layer in keymap.c |
4 years ago |
|
James Young
|
fced377ac0
|
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change" |
4 years ago |
|
Jonathan Rascher
|
4597f2bcc8
|
[Keymap] Make personal keymaps a bit more consistent (#8915)
* Move menu key on ergo boards to match staggered * Unify 60_tsangan_hhkb and 60_ansi_split_bs_rshift * Sync KBD67, Quefrency with community layouts * Update ergo KLE images * Update community layout KLE images * Update KLE images/descriptions for remaining keebs |
4 years ago |
|
Jonathan Rascher
|
c1c579c554
|
[Keymap] Clean up my ergo keymaps and userspace (#8857)
* Remove more mouse keys settings missed in #8836 * Turn off more unwanted make options * clang-format my userspace * Reword ergo layout docs so Crkbd is canonical * Add a basic readme to my userspace * Tweak Crkbd readme wording and fix typos * Enable SPLIT_USB_DETECT for Lily58 w/ Elite-C bug |
4 years ago |
|
Drashna Jaelre
|
c67e304593
|
[Keymap] Drashna's Cleanup and RGB Divide (#8506)
* Enable External EEPROM on Planck Rev6 * Update KC_MAKE macro to use qmk cli util * Disable additional gradients for rgb matrix * Update analog code for newer methods * Update ergodox layout * Disable Grave Escape * Cleanup OLED code a bit * Remove old unicode code * Seperate RGB Matrix code from RGB Light code in userspace * Massive overhaul an generalization of personal OLED code Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation. * Super tiny cleanup * Enable Diablo layer on kyria * clang format pass * Additional OLED cleanup |
4 years ago |
 Jonas Avellana
|
0fdd37ee19
|
[Keymap] ninjonas keymap updates (#8373)
* [keymap(ninjonas)] ninjonas keymap updates * [refactor] switching encoder rotation logic. recent pull seems to have flipped encoder stuff * [keymap(lily58)] added chrome change profile key on RAISE Co-authored-by: Jonas Avellana <jonas.avellana@workday.com> |
4 years ago |
 Richard Baptist
|
a4fd5e2491
|
[Keymap] Update personal keymap (#8354) | 4 years ago |
|
Ryan
|
c9e3fa6f70
|
Clean up includes for glcdfont headers (#7745)
* Clean up includes for glcdfont headers * Remove pragma once, most of these are not headers * Missed these |
4 years ago |
|
Jonathan Rascher
|
443bd98041
|
Move Grave/Tilde and some lesser used keys on my ergo boards (#8200)
* Move Grave/Tilde keys to more convenient places * Move Ins/Del and some other keys around * Update KLE images |
4 years ago |
|
Jonas Avellana
|
79e6b78669
|
[Keymap] ninjonas keymap updates (#8170)
* [keymap] ninjonas keymap updates * [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores * [keymap(lily58)] added numpad layer * [keymap(crkbd)] added numpad layer activated through tapdance * [fix(8170)] fixing code review changes requested by noroadsleft * [fix(8170)] updating comments and .md files to use 'Cmd' instead of and ⌘ |
4 years ago |
|
Jonathan Rascher
|
1fed214490
|
Tweak my TAPPING_TERM and be more futureproof (#8143)
* Explicitly undef things I override in keymaps * Reduce TAPPING_TERM back to default |
4 years ago |
|
Jonas Avellana
|
50554ca270
|
Ninjonas userspace (#8070)
* [keymap(kyria)] moved OLED & encoder implementation to separate classes * [feat] created logic to cycle through hue wheel when starting keyboard * [feat] created logic to cycle through hue wheel and return to user's default color * [refactor] updating OLED layout for crkbd & lily58 * [refactor] updating OLED layout for crkbd & lily58 * [fix(8070)] updating encoder.c logic based off drashna's code review * [refactor(8070)] added key to send + Shift + M |
4 years ago |
 Lucas Moreira
|
9ff61601e3 |
[Keymap] crkbd/kidbrazil adding layer dependent RGB & better idle timeout. (#7901)
* Added KidBrazil custom keymap for CRKBD -Custom Font -Custom OLED output * Added missing readme * Oled Timeout Update for KidBrazil Keymap (#1) * Setup Oled timeout based on simple timer * Cleaned up comments and added timeout for LEDs * Fixed some small errors * Updated oled timout with matrix scan * Updated oled timout with matrix scan * Update withou eeprom * Update timer code * Use process user instead of keymap * Added ifdef to protect oledtimer * Updated with half timeout state for logo * Removed middle tier timer * Final cleanup of unused files * Updated code as per suggestions & requests * Second round of revisions * Updated keymap to better handle LED timeout - Added boolean to hold LED state - Added init function to set rgb to known state - Modified RGB_TOG to work with noeeprom commands * Finished adding the timeout for OLED and testing on CRKBD * Updated documentation * fixed the timeout logic so it works as intended * Added initial limits to color settings * Added layer reset as part of the iddle timeout process * Split Keymap into more manageable files * Finalizing RGB Layer status on CRKBD - Refactored OLED timeout to deal only with oled - If user remains iddle on game layer for too long it will switch to default - LED / OLED iddle working - Minor changes to _SYM layer - Removed some rgb controls from keyboard due to layer dependent RGB colors * Update keyboards/crkbd/keymaps/kidbrazil/keymap.c Used suggestion from Drashna to replace EEPROM_RESET with shorter version. Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/crkbd/keymaps/kidbrazil/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Implemented drashna's comment Co-authored-by: Drashna Jaelre <drashna@live.com> |
4 years ago |
 Akaash Suresh
|
6ff093efbe | Local Changes | 4 years ago |
 dsanchezseco
|
37db6012a7 |
keymap, fixed rgb effect name and deactivate oled (#7953)
* added rgblight controls to planck keymap * fixed knight ridder offset to face me * no oled for crkbd 'till fixed * fixed RGB effect name |
4 years ago |
|
Jonathan Rascher
|
5cb83dd5d7 |
Personal keymap updates for the new year (#7871)
* Update keymaps for split ergo boards * Update keymaps for 60% boards |
4 years ago |
|
Akaash Suresh
|
caa70df816 |
[Keymap] Userspace refactor, adding leader key functionality (#7790)
* Userspace refactor * Fixed missed ifdef * tapcode16, adjust layout * glcdfont changes from #7745 * Modify Keymaps, add workman * RGB & OLED update |
4 years ago |
|
Lucas Moreira
|
fdc144d215 |
[Keymap] Improvements to KidBrazil keymap to better handle OLED/LED Matrix timeout. (#7688)
* Added KidBrazil custom keymap for CRKBD -Custom Font -Custom OLED output * Added missing readme * Oled Timeout Update for KidBrazil Keymap (#1) * Setup Oled timeout based on simple timer * Cleaned up comments and added timeout for LEDs * Fixed some small errors * Updated oled timout with matrix scan * Updated oled timout with matrix scan * Update withou eeprom * Update timer code * Use process user instead of keymap * Added ifdef to protect oledtimer * Updated with half timeout state for logo * Removed middle tier timer * Final cleanup of unused files * Updated code as per suggestions & requests * Second round of revisions * Updated keymap to better handle LED timeout - Added boolean to hold LED state - Added init function to set rgb to known state - Modified RGB_TOG to work with noeeprom commands * Finished adding the timeout for OLED and testing on CRKBD * Updated documentation * fixed the timeout logic so it works as intended * Update keyboards/crkbd/keymaps/kidbrazil/README.md |
4 years ago |