You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073)
2 months ago
..
galaxy LED drivers: update keyboard LED configs (#23073) 2 months ago
hades_ansi LED drivers: update keyboard LED configs (#23073) 2 months ago
hades_iso LED drivers: update keyboard LED configs (#23073) 2 months ago
venus LED drivers: update keyboard LED configs (#23073) 2 months ago
config.h Migrate RGB Matrix config to info.json - D (#22811) 3 months ago
dgk6x.c Remove magic bodges from via keymaps (#19890) 1 year ago
dgk6x.h Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438) 1 year ago
halconf.h Durgod: Increase scan rate by using wait_us GPT timer (#14091) 2 years ago
info.json Migrate RGB Matrix config to info.json - D (#22811) 3 months ago
mcuconf.h [Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893) 2 years ago
readme.md [Keyboard] Add support for ISO version of Durgod Hades (#20110) 1 year ago
rules.mk [Keyboard] Add support for ISO version of Durgod Hades (#20110) 1 year ago

readme.md

DGK6X = Venus, Hades, Galaxy, etc.

This DGK6X code is shared between the ANSI variants of Venus, Hades and Galaxy keyboards.

  • Keyboard Maintainer: J-Sully and dkjer
  • Hardware Supported: Durgod Venus, Hades or Galaxy board with STM32F070RBT6
  • Hardware Availability: Venus, Hades and Galaxy

Instructions

Build

Instructions for building the Venus, Hades and Galaxy firmware can be found here:

Initial Flash

For first Flashing from initial Stock's Firmware

  1. Back up original Firmware Image:
  • Unplug
  • Short Boot0 to Vdd (See below)
  • Plug In USB
  • Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
    • Using dfu-util:

      dfu-util --list
      dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
      
  1. Flash the QMK Firmware Image.
  • Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
  • Here are a few options for performing the initial Flash:
    • Using QMK Toolbox

    • Using dfu-util:

      dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
      

You can short Boot0 to Vdd by shorting R19 to C30 on the sides closest to the processor, as shown:

  • Hades & Venus: Shorting Boot0 to Vdd on Hades or Venus

  • Galaxy 75 Shorting Boot0 to Vdd on Galaxy 75

Subsequent Flashing

For repeating Flashing you can use BootMagic:

  • BootMagic Lite has been enabled with Assigned "Esc" key
  • Unplug USB Cable
  • Holding Esc Button
  • Plug in USB Cable, Keyboard should be in ST-Bootloader state