You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Duncan Sutherland bea97291dc
Remove community layout from mode/m80*/m80*h (#22461)
3 months ago
..
m80h Remove community layout from mode/m80*/m80*h (#22461) 3 months ago
m80s Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 10 months ago
chconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
config.h Move matrix config to info.json, part 7 (#20020) 1 year ago
halconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
mcuconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
readme.md RESET -> QK_BOOT keyboard readme (#18110) 1 year ago

readme.md

Mode Eighty V1 PCB QMK firmware

MODE80
Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F072 controller
  • Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website.

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v1/m80h:default # Hotswap
make mode/m80v1/m80s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v1/m80h:default:flash # Hotswap
make mode/m80v1/m80s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.