You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Duncan Sutherland bea97291dc
Remove community layout from mode/m80*/m80*h (#22461)
3 months ago
..
m80v2h Remove community layout from mode/m80*/m80*h (#22461) 3 months ago
m80v2s Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 10 months ago
chconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
config.h Move matrix config to info.json, part 7 (#20020) 1 year ago
halconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
mcuconf.h [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) 2 years ago
readme.md RESET -> QK_BOOT keyboard readme (#18110) 1 year ago

readme.md

Mode Eighty V2 PCB QMK firmware

MODE80
Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F072 controller
  • Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v2/m80v2h:default # Hotswap
make mode/m80v2/m80v2s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v2/m80v2h:default:flash # Hotswap
make mode/m80v2/m80v2s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.