* my planck keymap
* my planck keymap
* minor changes
* Added personalized, VIA compatible keymap to the Melody96
* lighting layers added and keymap tweaked
* added basic descriptions
* added basic descriptions
* added basic descriptions
* added basic descriptions
* hopefully removed personal change to .gitignore
* restored .gitignore from my master
* restored .gitignore from my master
* requested changes and minor functionality tweaks
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
The previous implementation generated accents in NFKD -- e.g., i
followed by fn+e would generate í, which is actually an ordinary i
followed by U+0301 COMBINING ACUTE ACCENT. Unfortunately, it turns
out that a bunch of websites and apps (especially European ones
written in languages that use these a lot) were very poorly written,
and will misparse and/or crash if presented with Unicode NFKD. They
require and expect NFKC, with characters like í (U+00ED LATIN SMALL
I WITH ACUTE) that look visually identical -- and are in fact
normalization-equivalent -- but have to be encoded differently.
The new accent implementation handles this in a very flexible way.
Many new comments added as well, as it's also clear that this is going
to need a bit more expansion before it becomes a true polyglot keymap.
Co-authored-by: Yonatan Zunger <zunger@desiderata.lan>
* Update the melody96/zunger layout to make typing Romance languages easier.
Move the combining accents to fn + (keys used by Mac OS for that purpose),
and move the fn key to be the one adjacent to the space bar, since one needs
to type combinations of that a lot more than one needs to type Greek letters
in normal use. (As determined by experiment)
Also clean up the comments.
Co-authored-by: Yonatan Zunger <zunger@desiderata.lan>
* Add files needed to The Via support on Melody 96
* Remove manufacture name from product name
* replace blank key with Transparent keys
* Update keyboards/melody96/rules.mk
* Update keyboards/melody96/keymaps/via/keymap.c
* Change Product ID to "M" + 96
* Update keyboards/melody96/keymaps/via/rules.mk
* add LTO to via's local file
* Update keyboards/melody96/rules.mk
* Replace custom RCTRL implementation with built-in LM
Caveat: sends LCtrl instead of RCtrl
* Enable VIA support in KBD6X keymap
* Disable LTO on ChibiOS boards
* Disable locking support and Magic keycodes for all keymaps
* Organize and annotate rules.mk and config.h files
* Enable Console for Melody96 keymap
* L_RANGE_KEYMAP → LAYERS_KEYMAP
* Revert "Replace custom RCTRL implementation with built-in LM"
This reverts commit 17d706a82d.
* Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps
* Enable Bootmagic Lite for all VIA keymaps
* Update mousekey parameters in userspace
* Disable GRAVE_ESC in boards where it isn't used
* Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X
* Disable RGB controls when Fn/Caps indicator lights are on
* Use LTO_ENABLE instead of setting -flto directly
* Add led_update_keymap, use SS_LCTL instead of SS_LCTRL
* Change TAPPING_TOGGLE from 2 to 3
* Add missing void parameter declarations to *_light functions
* Add doro67/multi:konstantin keymap
* Allow FNLK to be canceled with Esc
* Function layer → Fn layer in keymap comments
* Enable Fn layer tap dances only if LAYER_FN is defined
* Update KBD6X keymap spacing to match LAYOUT spacing
* Add regular FNLK to userspace, update keymap comment labels
* Rename KC_BRK → BREAK, KC_SYSR → SYSRQ in userspace
* Change mousekey positions in KBD6X
* Disable Console in KBD6X to reduce firmware size
* Return false in process_record_* only when overriding existing keys
* Fix Caps light not working after LSFT_FN
* Refactor Fn/Caps light, fix sequencing issues
* Update MODERN_DOLCH_RED color
* Remove unused RAL_LAL tap dance
* Disable Space Cadet on all boards
* Rework SEND_STRING_CLEAN into CLEAN_MODS, fix DST_P_R/DST_N_A
* Disable unnecessary underglow animations
* Rearrange feature flags in rules.mk files
* Change custom colors from structs to defines
* Add some explicit initializers
* Add MODERN_DOLCH_CYAN color
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add led_set_keymap() template function
* Change underglow color based on Caps/Fn state
* Preserve val when changing underglow colors
* Only trigger Fn light for Fn layer
* Refactor fn_light() and caps_light() slightly
* Add comments to fn_light() and caps_light()
* Add Configurator layout data for LAYOUT_hotswap
* Add LAYOUT_std60_split_num0
Requested by 李小安#9728 on QMK Discord.
Standard 60% ANSI layout for the alphanumeric region, with a split-0 Numpad.
Includes a sample keymap.
* Update Docs links on readme
* Change melody96.h to use #pragma once include guard
* Change config.h to use #pragma once include guard
* Add readme for default_std60_split_num0 keymap
* Add missing TD_RSF_RCT tap dance
* Use standard QMK HSV and RGB structs, fix Godspeed colors
* Move PROGMEM after the type in RGB intervals
* Add MODERN_DOLCH_RED color, use it on KBD6X
* Use 255 instead of RGBLIGHT_LIMIT_VAL in color definitions
* Remove IS_COMMAND override on Whitefox
* Add wasdat:konstantin keymap
TODO: Move it to layouts/
* Use HHKB arrow arrangement for mouse keys on KBD6X
* Move KC_APP from Ctrl to M on all boards
* Use RCT_RSF on Melody96
* Set TAP_HOLD_CAPS_DELAY to 50 in userspace
* Use RSF_RCT instead of RCT_RSF
* Add FnLk to Melody96 bottom row
* Update conditional in userspace makefile
Thanks @drashna
* Add F keys to Melody96 Fn layer
* Add FN_ESC alias to userspace
* Update KBD6X keymap
* Fix RGB_MATRIX_ENABLE constant name in #if
* Remove trailing \ from LAYOUT macro calls
* Set RGB mode on EEPROM reset in KBD6X
* Swap right and middle mouse buttons in KBD6X
* Rearrange RGB controls in KBD6X
* Update keycode aliases, replace CLEAR with DEL_NXT in KBD6X
Add Clear to KBD6X as RCtrl+`
* Convert code to 4 space indents
* Tweak RCTRL layer functionality
* Replace NUMPAD custom keycode with layer state logic
* Update RGB_MATRIX_ENABLE check
Co-Authored-By: vomindoraan <vomindoraan@gmail.com>
devilzmods
James Young
Konstantin Đorđević
Ryan
yonatanzunger
Vincent Lee
zunger-humu
Konstantin Đorđević
crilith
johanntang
MechMerlin
kaylanm
Pierre Constantineau
fordmustang5l