You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 364c06d939
Move small macropad-ish layouts to data driven (#20341)
1 year ago
..
keymaps/default Deprecate `KC_LOCK` for `QK_LOCK` (#18796) 1 year ago
config.h Move matrix config to info.json, part 6 (#20019) 1 year ago
info.json Move small macropad-ish layouts to data driven (#20341) 1 year ago
readme.md RESET -> QK_BOOT keyboard readme (#18110) 1 year ago
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 1 year ago
snatchpad.c Move small macropad-ish layouts to data driven (#20341) 1 year ago

readme.md

snatchpad

snatchpad etch-a-sketch macropad

A 6-key macropad with 2 rotary encoders intended for use as a pointing device.

In addition to the 3d printed parts and microcontroller, the following hardware is required:

  • 4 * 3x3 mm threaded inserts
  • 4 * 4mm M3 bolt
  • USB daughter board

  • Keyboard Maintainer: xia0
  • Hardware Supported: e.g. Arduino Pro Micro
  • Hardware Availability: github

Make example for this keyboard (after setting up your build environment):

make handwired/snatchpad:default

Flashing example for this keyboard:

make handwired/snatchpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available