|
|
- // -----------------------------------------------------------------------------
- // Configuration HELP
- // -----------------------------------------------------------------------------
- //
- // MANUFACTURER: Name of the manufacturer of the board ("string")
- // DEVICE: Name of the device ("string")
- // BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)
- // BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)
- // BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)
- // - BUTTON_PUSHBUTTON: button event is fired when released
- // - BUTTON_SWITCH: button event is fired when pressed or released
- // - BUTTON_DEFAULT_HIGH: there is a pull up in place
- // - BUTTON_SET_PULLUP: set pullup by software
- // RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)
- // RELAY#_TYPE: Relay can be RELAY_TYPE_NORMAL, RELAY_TYPE_INVERSE or RELAY_TYPE_LATCHED
- // LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)
- // LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)
- // LED#_MODE: Check hardware.h for LED_MODE_%
- // LED#_RELAY: Linked relay (1-based)
- //
- // Besides, other hardware specific information should be stated here
-
- // -----------------------------------------------------------------------------
- // Development boards
- // -----------------------------------------------------------------------------
- #if defined(NODEMCU_LOLIN)
-
- // Info
- #define MANUFACTURER "NODEMCU"
- #define DEVICE "LOLIN"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 5
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_PIN 4
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
- #define RELAY3_PIN 12
- #define RELAY3_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 1
-
- #elif defined(WEMOS_D1_MINI_RELAYSHIELD)
-
- // Info
- #define MANUFACTURER "WEMOS"
- #define DEVICE "D1_MINI_RELAYSHIELD"
-
- // Buttons
- // No buttons on the D1 MINI alone, but defining it without adding a button doen't create problems
- #define BUTTON1_PIN 0 // Connect a pushbutton between D3 and GND,
- // it's the same as using a Wemos one button shield
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 5
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 1
-
- #elif defined(WEMOS_D1_TARPUNA_SHIELD)
-
- // Info
- #define MANUFACTURER "WEMOS"
- #define DEVICE "D1_TARPUNA_SHIELD"
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // -----------------------------------------------------------------------------
- // ESPurna
- // -----------------------------------------------------------------------------
-
- #elif defined(TINKERMAN_ESPURNA_H06)
-
- // Info
- #define MANUFACTURER "TINKERMAN"
- #define DEVICE "ESPURNA_H06"
-
- // Buttons
- #define BUTTON1_PIN 4
- #define BUTTON1_RELAY 1
-
- // Normal pushbutton
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_INVERSE
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 1
-
- // HLW8012
- #ifndef HLW8012_SUPPORT
- #define HLW8012_SUPPORT 1
- #endif
- #define HLW8012_SEL_PIN 2
- #define HLW8012_CF1_PIN 13
- #define HLW8012_CF_PIN 14
-
- #elif defined(TINKERMAN_ESPURNA_H08)
-
- // Info
- #define MANUFACTURER "TINKERMAN"
- #define DEVICE "ESPURNA_H08"
-
- // Buttons
- #define BUTTON1_PIN 4
- #define BUTTON1_RELAY 1
-
- // Normal pushbutton
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 0
-
- // HLW8012
- #ifndef HLW8012_SUPPORT
- #define HLW8012_SUPPORT 1
- #endif
- #define HLW8012_SEL_PIN 5
- #define HLW8012_CF1_PIN 13
- #define HLW8012_CF_PIN 14
-
- #elif defined(TINKERMAN_ESPURNA_SWITCH)
-
- // Info
- #define MANUFACTURER "TINKERMAN"
- #define DEVICE "ESPURNA_SWITCH"
-
- // Buttons
- #define BUTTON1_PIN 4
- #define BUTTON1_RELAY 1
-
- // Touch button
- #define BUTTON1_MODE BUTTON_PUSHBUTTON
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 0
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_INVERSE
-
- // -----------------------------------------------------------------------------
- // Itead Studio boards
- // -----------------------------------------------------------------------------
-
- #elif defined(ITEAD_SONOFF_BASIC)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_BASIC"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
- #define BUTTON2_PIN 14
- #define BUTTON2_MODE BUTTON_SWITCH | BUTTON_SET_PULLUP
- #define BUTTON2_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_RF)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_RF"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
- #define BUTTON2_PIN 14
- #define BUTTON2_MODE BUTTON_SWITCH | BUTTON_SET_PULLUP
- #define BUTTON2_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_TH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_TH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- // Jack is connected to GPIO14 (and with a small hack to GPIO4)
- #ifndef DALLAS_SUPPORT
- #define DALLAS_SUPPORT 1
- #endif
- #define DALLAS_PIN 14
-
- #ifndef DHT_SUPPORT
- #define DHT_SUPPORT 1
- #endif
- #define DHT_PIN 14
-
- //#define I2C_SDA_PIN 4
- //#define I2C_SCL_PIN 14
-
- #elif defined(ITEAD_SONOFF_SV)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_SV"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SLAMPHER)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SLAMPHER"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_S20)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "S20"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_TOUCH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_TOUCH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_POW)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_POW"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 15
- #define LED1_PIN_INVERSE 0
-
- // HLW8012
- #ifndef HLW8012_SUPPORT
- #define HLW8012_SUPPORT 1
- #endif
- #define HLW8012_SEL_PIN 5
- #define HLW8012_CF1_PIN 13
- #define HLW8012_CF_PIN 14
-
- #elif defined(ITEAD_SONOFF_DUAL)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_DUAL"
- #define SERIAL_BAUDRATE 19230
- #define RELAY_PROVIDER RELAY_PROVIDER_DUAL
- #define DUMMY_RELAY_COUNT 2
- #define DEBUG_SERIAL_SUPPORT 0
- #define TERMINAL_SUPPORT 0
-
- // Buttons
- #define BUTTON3_RELAY 1
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_DUAL_R2)
-
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_DUAL_R2"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
- #define BUTTON3_PIN 10
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
- #define BUTTON3_RELAY 1
- #define BUTTON1_MODE BUTTON_SWITCH | BUTTON_SET_PULLUP
- #define BUTTON2_MODE BUTTON_SWITCH | BUTTON_SET_PULLUP
- #define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_4CH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_4CH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
- #define BUTTON3_PIN 10
- #define BUTTON4_PIN 14
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON4_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
- #define BUTTON3_RELAY 3
- #define BUTTON4_RELAY 4
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
- #define RELAY3_PIN 4
- #define RELAY4_PIN 15
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
- #define RELAY3_TYPE RELAY_TYPE_NORMAL
- #define RELAY4_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_4CH_PRO)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_4CH_PRO"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
- #define BUTTON3_PIN 10
- #define BUTTON4_PIN 14
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON4_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
- #define BUTTON3_RELAY 3
- #define BUTTON4_RELAY 4
-
- // Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle
- // buttons and relays, but it also forwards button presses to the ESP8285.
- // This allows ESPurna to handle button presses -almost- the same way
- // as with other devices except:
- // * Double click seems to break/disable the button on the STM32 side
- // * With S6 switch to 1 (self-locking and inching modes) everything's OK
- // * With S6 switch to 0 (interlock mode) if there is a relay ON
- // and you click on another relay button, the STM32 sends a "press"
- // event for the button of the first relay (to turn it OFF) but it
- // does not send a "release" event. It's like it's holding the
- // button down since you can see it is still LOW.
- // Whatever reason the result is that it may actually perform a
- // long click or long-long click.
- // The configuration below make the button toggle the relay on press events
- // and disables any possibly harmful combination with S6 set to 0.
- // If you are sure you will only use S6 to 1 you can comment the
- // BUTTON1_LNGCLICK and BUTTON1_LNGLNGCLICK options below to recover the
- // AP mode and factory reset functionalities.
-
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE
- #define BUTTON2_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON2_CLICK BUTTON_MODE_NONE
- #define BUTTON3_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON3_CLICK BUTTON_MODE_NONE
- #define BUTTON4_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON4_CLICK BUTTON_MODE_NONE
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
- #define RELAY3_PIN 4
- #define RELAY4_PIN 15
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
- #define RELAY3_TYPE RELAY_TYPE_NORMAL
- #define RELAY4_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_1CH_INCHING)
-
- // The inching functionality is managed by a misterious IC in the board.
- // You cannot control the inching button and functionality from the ESP8266
- // Besides, enabling the inching functionality using the hardware button
- // will result in the relay switching on and off continuously.
- // Fortunately the unkown IC keeps memory of the hardware inching status
- // so you can just disable it and forget. The inching LED must be lit.
- // You can still use the pulse options from the web interface
- // without problem.
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "1CH_INCHING"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_MOTOR)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "MOTOR"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_RELAY 1
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_BNSZ01)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "BNSZ01"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 1
- #define LIGHT_CH1_PIN 12
- #define LIGHT_CH1_INVERSE 0
-
- #elif defined(ITEAD_SONOFF_RFBRIDGE)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_RFBRIDGE"
- #define SERIAL_BAUDRATE 19200
- #define RELAY_PROVIDER RELAY_PROVIDER_RFBRIDGE
-
- #ifndef DUMMY_RELAY_COUNT
- #define DUMMY_RELAY_COUNT 8
- #endif
-
- // Remove UART noise on serial line
- #define TERMINAL_SUPPORT 0
- #define DEBUG_SERIAL_SUPPORT 0
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_B1)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_B1"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 5
- #define MY92XX_MODEL MY92XX_MODEL_MY9231
- #define MY92XX_CHIPS 2
- #define MY92XX_DI_PIN 12
- #define MY92XX_DCKI_PIN 14
- #define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT
- #define MY92XX_MAPPING 4, 3, 5, 0, 1
-
- #elif defined(ITEAD_SONOFF_LED)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_LED"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 2
- #define LIGHT_CH1_PIN 12 // Cold white
- #define LIGHT_CH2_PIN 14 // Warm white
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
-
- #elif defined(ITEAD_SONOFF_T1_1CH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_T1_1CH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_T1_2CH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_T1_2CH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET
-
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON2_CLICK BUTTON_MODE_NONE
- #define BUTTON2_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGLNGCLICK BUTTON_MODE_RESET
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- #elif defined(ITEAD_SONOFF_T1_3CH)
-
- // Info
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_T1_3CH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
- #define BUTTON3_PIN 10
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON1_CLICK BUTTON_MODE_NONE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET
-
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON2_CLICK BUTTON_MODE_NONE
- #define BUTTON2_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGLNGCLICK BUTTON_MODE_RESET
-
- #define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON3_PRESS BUTTON_MODE_TOGGLE
- #define BUTTON3_CLICK BUTTON_MODE_NONE
- #define BUTTON3_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON3_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON3_LNGLNGCLICK BUTTON_MODE_RESET
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
- #define BUTTON3_RELAY 3
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
- #define RELAY3_PIN 4
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
- #define RELAY3_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
-
- // -----------------------------------------------------------------------------
- // YJZK
- // -----------------------------------------------------------------------------
-
- #elif defined(YJZK_SWITCH_2CH)
-
- // Info
- #define MANUFACTURER "YJZK"
- #define DEVICE "SWITCH_2CH"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 9
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 5
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 0
-
-
- // -----------------------------------------------------------------------------
- // Electrodragon boards
- // -----------------------------------------------------------------------------
-
- #elif defined(ELECTRODRAGON_WIFI_IOT)
-
- // Info
- #define MANUFACTURER "ELECTRODRAGON"
- #define DEVICE "WIFI_IOT"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON2_PIN 2
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 13
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 16
- #define LED1_PIN_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // WorkChoice ecoPlug
- // -----------------------------------------------------------------------------
-
- #elif defined(WORKCHOICE_ECOPLUG)
-
- // Info
- #define MANUFACTURER "WORKCHOICE"
- #define DEVICE "ECOPLUG"
-
- // Buttons
- #define BUTTON1_PIN 13
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 15
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // AI Thinker
- // -----------------------------------------------------------------------------
-
- #elif defined(AITHINKER_AI_LIGHT)
-
- // Info
- #define MANUFACTURER "AITHINKER"
- #define DEVICE "AI_LIGHT"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define MY92XX_MODEL MY92XX_MODEL_MY9291
- #define MY92XX_CHIPS 1
- #define MY92XX_DI_PIN 13
- #define MY92XX_DCKI_PIN 15
- #define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT
- #define MY92XX_MAPPING 0, 1, 2, 3
-
- // -----------------------------------------------------------------------------
- // LED Controller
- // -----------------------------------------------------------------------------
-
- #elif defined(MAGICHOME_LED_CONTROLLER)
-
- // Info
- #define MANUFACTURER "MAGICHOME"
- #define DEVICE "LED_CONTROLLER"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 14 // RED
- #define LIGHT_CH2_PIN 5 // GREEN
- #define LIGHT_CH3_PIN 12 // BLUE
- #define LIGHT_CH4_PIN 13 // WHITE
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
- // IR
- #define IR_SUPPORT 1
- #define IR_PIN 4
- #define IR_BUTTON_SET 1
-
- #elif defined(MAGICHOME_LED_CONTROLLER_20)
-
- // Info
- #define MANUFACTURER "MAGICHOME"
- #define DEVICE "LED_CONTROLLER_20"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 5 // RED
- #define LIGHT_CH2_PIN 12 // GREEN
- #define LIGHT_CH3_PIN 13 // BLUE
- #define LIGHT_CH4_PIN 15 // WHITE
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
- // IR
- #define IR_SUPPORT 1
- #define IR_PIN 4
- #define IR_BUTTON_SET 1
-
- // -----------------------------------------------------------------------------
- // HUACANXING H801 & H802
- // -----------------------------------------------------------------------------
-
- #elif defined(HUACANXING_H801)
-
- // Info
- #define MANUFACTURER "HUACANXING"
- #define DEVICE "H801"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
- #define DEBUG_PORT Serial1
-
- // LEDs
- #define LED1_PIN 5
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 5
- #define LIGHT_CH1_PIN 15 // RED
- #define LIGHT_CH2_PIN 13 // GREEN
- #define LIGHT_CH3_PIN 12 // BLUE
- #define LIGHT_CH4_PIN 14 // WHITE1
- #define LIGHT_CH5_PIN 4 // WHITE2
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
- #define LIGHT_CH5_INVERSE 0
-
- #elif defined(HUACANXING_H802)
-
- // Info
- #define MANUFACTURER "HUACANXING"
- #define DEVICE "H802"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
- #define DEBUG_PORT Serial1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 12 // RED
- #define LIGHT_CH2_PIN 14 // GREEN
- #define LIGHT_CH3_PIN 13 // BLUE
- #define LIGHT_CH4_PIN 15 // WHITE
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // Jan Goedeke Wifi Relay
- // https://github.com/JanGoe/esp8266-wifi-relay
- // -----------------------------------------------------------------------------
-
- #elif defined(JANGOE_WIFI_RELAY_NC)
-
- // Info
- #define MANUFACTURER "JANGOE"
- #define DEVICE "WIFI_RELAY_NC"
-
- // Buttons
- #define BUTTON1_PIN 12
- #define BUTTON2_PIN 13
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 2
- #define RELAY2_PIN 14
-
- #define RELAY1_TYPE RELAY_TYPE_INVERSE
- #define RELAY2_TYPE RELAY_TYPE_INVERSE
-
- #elif defined(JANGOE_WIFI_RELAY_NO)
-
- // Info
- #define MANUFACTURER "JANGOE"
- #define DEVICE "WIFI_RELAY_NO"
-
- // Buttons
- #define BUTTON1_PIN 12
- #define BUTTON2_PIN 13
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 2
- #define RELAY2_PIN 14
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // -----------------------------------------------------------------------------
- // Jorge García Wifi+Relays Board Kit
- // https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit
- // https://github.com/jorgegarciadev/wifikit
- // -----------------------------------------------------------------------------
-
- #elif defined(JORGEGARCIA_WIFI_RELAYS)
-
- // Info
- #define MANUFACTURER "JORGEGARCIA"
- #define DEVICE "WIFI_RELAYS"
-
- // Relays
- #define RELAY1_PIN 0
- #define RELAY2_PIN 2
-
- #define RELAY1_TYPE RELAY_TYPE_INVERSE
- #define RELAY2_TYPE RELAY_TYPE_INVERSE
-
- // -----------------------------------------------------------------------------
- // WiFi MQTT Relay / Thermostat
- // -----------------------------------------------------------------------------
-
- #elif defined(OPENENERGYMONITOR_MQTT_RELAY)
-
- // Info
- #define MANUFACTURER "OPENENERGYMONITOR"
- #define DEVICE "MQTT_RELAY"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_RELAY 1
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 16
- #define LED1_PIN_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap
- // https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551
- // https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777
- // -----------------------------------------------------------------------------
-
- #elif defined(WION_50055)
-
- // Currently untested, does not support energy monitoring
-
- // Info
- #define MANUFACTURER "WION"
- #define DEVICE "50055"
-
- // Buttons
- #define BUTTON1_PIN 13
- #define BUTTON1_RELAY 1
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 15
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 2
- #define LED1_PIN_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // EX-Store Wifi Relay v3.1
- // https://ex-store.de/ESP8266-WiFi-Relay-V31
- // -----------------------------------------------------------------------------
-
- #elif defined(EXS_WIFI_RELAY_V31)
-
- // Untested
-
- // Info
- #define MANUFACTURER "EXS"
- #define DEVICE "WIFI_RELAY_V31"
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_RELAY 1
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- // Relays
- #define RELAY1_PIN 13
- #define RELAY1_TYPE RELAY_TYPE_LATCHED
- #define RELAY1_RESET_PIN 12
-
- // -----------------------------------------------------------------------------
- // V9261F
- // -----------------------------------------------------------------------------
-
- #elif defined(GENERIC_V9261F)
-
- // Info
- #define MANUFACTURER "GENERIC"
- #define DEVICE "V9261F"
- #define ALEXA_SUPPORT 0
-
- // V9261F
- #define V9261F_SUPPORT 1
- #define V9261F_PIN 2
- #define V9261F_PIN_INVERSE 1
-
- // -----------------------------------------------------------------------------
- // ECH1560
- // -----------------------------------------------------------------------------
-
- #elif defined(GENERIC_ECH1560)
-
- // Info
- #define MANUFACTURER "GENERIC"
- #define DEVICE "ECH1560"
- #define ALEXA_SUPPORT 0
-
- // ECH1560
- #define ECH1560_SUPPORT 1
- #define ECH1560_CLK_PIN 4
- #define ECH1560_MISO_PIN 5
- #define ECH1560_INVERTED 0
-
- // -----------------------------------------------------------------------------
- // ESPLive
- // https://github.com/ManCaveMade/ESP-Live
- // -----------------------------------------------------------------------------
-
- #elif defined(MANCAVEMADE_ESPLIVE)
-
- // Info
- #define MANUFACTURER "MANCAVEMADE"
- #define DEVICE "ESPLIVE"
-
- // Buttons
- #define BUTTON1_PIN 4
- #define BUTTON2_PIN 5
-
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-
- #define BUTTON1_RELAY 1
- #define BUTTON2_RELAY 2
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY2_PIN 13
-
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
-
- // DB18B20
- #ifndef DALLAS_SUPPORT
- #define DALLAS_SUPPORT 1
- #endif
- #define DALLAS_PIN 2
- #define DALLAS_UPDATE_INTERVAL 5000
- #define TEMPERATURE_MIN_CHANGE 1.0
-
- // -----------------------------------------------------------------------------
- // QuinLED
- // http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html
- // -----------------------------------------------------------------------------
-
- #elif defined(INTERMITTECH_QUINLED)
-
- // Info
- #define MANUFACTURER "INTERMITTECH"
- #define DEVICE "QUINLED"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // LEDs
- #define LED1_PIN 5
- #define LED1_PIN_INVERSE 1
-
- // Light
- #define LIGHT_CHANNELS 2
- #define LIGHT_CH1_PIN 0
- #define LIGHT_CH2_PIN 2
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
-
- // -----------------------------------------------------------------------------
- // Arilux AL-LC06
- // -----------------------------------------------------------------------------
-
- #elif defined(ARILUX_AL_LC01)
-
- // Info
- #define MANUFACTURER "ARILUX"
- #define DEVICE "AL_LC01"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 5 // RED
- #define LIGHT_CH2_PIN 12 // GREEN
- #define LIGHT_CH3_PIN 13 // BLUE
- #define LIGHT_CH4_PIN 14 // WHITE1
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
-
- #elif defined(ARILUX_AL_LC02)
-
- // Info
- #define MANUFACTURER "ARILUX"
- #define DEVICE "AL_LC02"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 12 // RED
- #define LIGHT_CH2_PIN 5 // GREEN
- #define LIGHT_CH3_PIN 13 // BLUE
- #define LIGHT_CH4_PIN 15 // WHITE1
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
- #elif defined(ARILUX_AL_LC06)
-
- // Info
- #define MANUFACTURER "ARILUX"
- #define DEVICE "AL_LC06"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 5
- #define LIGHT_CH1_PIN 14 // RED
- #define LIGHT_CH2_PIN 12 // GREEN
- #define LIGHT_CH3_PIN 13 // BLUE
- #define LIGHT_CH4_PIN 15 // WHITE1
- #define LIGHT_CH5_PIN 5 // WHITE2
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
- #define LIGHT_CH5_INVERSE 0
-
-
- #elif defined(ARILUX_AL_LC11)
-
- // Info
- #define MANUFACTURER "ARILUX"
- #define DEVICE "AL_LC11"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 5
- #define LIGHT_CH1_PIN 5 // RED
- #define LIGHT_CH2_PIN 4 // GREEN
- #define LIGHT_CH3_PIN 14 // BLUE
- #define LIGHT_CH4_PIN 13 // WHITE1
- #define LIGHT_CH5_PIN 12 // WHITE1
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
- #define LIGHT_CH5_INVERSE 0
-
-
- #elif defined(ARILUX_E27)
-
- // Info
- #define MANUFACTURER "ARILUX"
- #define DEVICE "E27"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define MY92XX_MODEL MY92XX_MODEL_MY9291
- #define MY92XX_CHIPS 1
- #define MY92XX_DI_PIN 13
- #define MY92XX_DCKI_PIN 15
- #define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT
- #define MY92XX_MAPPING 0, 1, 2, 3
-
- // -----------------------------------------------------------------------------
- // XENON SM-PW701U
- // -----------------------------------------------------------------------------
-
- #elif defined(XENON_SM_PW702U)
-
- // Info
- #define MANUFACTURER "XENON"
- #define DEVICE "SM_PW702U"
-
- // Buttons
- #define BUTTON1_PIN 13
- #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 4
- #define LED1_PIN_INVERSE 1
-
- // -----------------------------------------------------------------------------
- // AUTHOMETION LYT8266
- // https://authometion.com/shop/en/home/13-lyt8266.html
- // -----------------------------------------------------------------------------
-
- #elif defined(AUTHOMETION_LYT8266)
-
- // Info
- #define MANUFACTURER "AUTHOMETION"
- #define DEVICE "LYT8266"
- #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
- #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
- #define DUMMY_RELAY_COUNT 1
-
- // Light
- #define LIGHT_CHANNELS 4
- #define LIGHT_CH1_PIN 13 // RED
- #define LIGHT_CH2_PIN 12 // GREEN
- #define LIGHT_CH3_PIN 14 // BLUE
- #define LIGHT_CH4_PIN 2 // WHITE
- #define LIGHT_CH1_INVERSE 0
- #define LIGHT_CH2_INVERSE 0
- #define LIGHT_CH3_INVERSE 0
- #define LIGHT_CH4_INVERSE 0
-
- #define LIGHT_ENABLE_PIN 15
-
- // -----------------------------------------------------------------------------
- // Generic 8CH
- // -----------------------------------------------------------------------------
-
- #elif defined(GENERIC_8CH)
-
- // Info
- #define MANUFACTURER "GENERIC"
- #define DEVICE "8CH"
-
- // Relays
- #define RELAY1_PIN 0
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
- #define RELAY2_PIN 2
- #define RELAY2_TYPE RELAY_TYPE_NORMAL
- #define RELAY3_PIN 4
- #define RELAY3_TYPE RELAY_TYPE_NORMAL
- #define RELAY4_PIN 5
- #define RELAY4_TYPE RELAY_TYPE_NORMAL
- #define RELAY5_PIN 12
- #define RELAY5_TYPE RELAY_TYPE_NORMAL
- #define RELAY6_PIN 13
- #define RELAY6_TYPE RELAY_TYPE_NORMAL
- #define RELAY7_PIN 14
- #define RELAY7_TYPE RELAY_TYPE_NORMAL
- #define RELAY8_PIN 15
- #define RELAY8_TYPE RELAY_TYPE_NORMAL
-
- // -----------------------------------------------------------------------------
- // Unknown hardware
- // -----------------------------------------------------------------------------
-
- #else
- #error "UNSUPPORTED HARDWARE!"
- #endif
|